Product Name:
Extra 300
The Model
We all have seen those 30" 3D airplanes but, not much of us have seen a 3D plane this size, specially doing so much. This unbelievaable model uses a 4 grams brushless motor and hoovers like any tipical 3D plane, but instead of needing all the gimm to fly it can do it in a quarter of the size!
The Extra structure is made from balsa ands then covered with silkspan tissue and then is finished out with markings.
The Model comes with a set of super sub-micro linear actuators for the rudder and elevator controls, a sub-micro speed control, a brushless micro motor (4 grams) and a 2 gm micro receiver.
Everything is top-of-the-line first class on the Extra.
Controls are just right for this type of model and power is excellent. It will easily rise off a smooth surface and all controls are proportional. The best place to fly it is indoors and a small gym is adequate.
You can expect run times in the 7-12 minute area. The model is just plain wonderful to fly and it is a crowd pleaser.
Each painstakingly handcrafted model is completely Ready to Fly and comes with all specially designed super micro radio equipment installed. Each model comes on a particular frequency, so we also supply a radio transmitter crystal on matching frequency.
A charge jack is supplied with the model so you can hook this up to your Li-Poly charger.
We carefully pack and double box the model so it will reach you in perfect condition.
When you're not flying the Extra, it makes a hadsome display in your living room or den cabinet.
Its a work of art.
The RTF version includes:
- Fully Extra RTF with all radio and motor system installed
- 1S 145 Li-Poly battery pack with leads
- Charge lead for Li-Pioly battrey pack
Here is a description from the manufacturer:
The RC aerobatic model EXTRA - Peanut size - is of a balsa structure and is designed for indoor flying and in the case of good weather also for outdoor flying, with minimum demands on the flight area.
The model is equipped with a dedicated special micro-RC system of Micro Invent making it possible to construct such a small and lightweight models on an outsourcing basis.
The flight properties of the model are remarkable, the model is capable of slow flying in an economic mode up to fast dynamic flying with all acrobatic elements depending on the pilot's experience.
 Characteristics of the model:
- Model span
|
330 mm |
- Flight weight of the model
|
26 g |
- Wing loading
|
9.5 g / sqdm |
- Controlled elements
|
ailerons, rudder , elevator, motor |
- Flight time
|
12 to 15 min. with 1x LiPoly 170 mAh |
- Curve diameter
|
2.0 m |
- Needed flying area
|
min. 20 x 15 x 6 m |
This model use :
| Receiver |
MINOR |
| Servo |
MCS3-A (1 pc), MCS2 (2 pcs) |
| Power unit |
GP15-4W |
| Propeller |
MCF5030 |
| Battery |
LIPO170-P |
|
Photos:
 
| Top view |
3/4 view |
| 3/4 view |
Videos:
Downloadable Video1 (right click and save target as)
Shipping
-Blue Prime International (6 business days).
Note:
This model is made by request, a 4 weeks delay should be expected.
|
