By TheWayEnd » Peanut Scale and Micro Models » Nieuport 11

	Product Name: Nieuport 11   The Model The best way to describe this model is:   Small, handcrafted, truly a beautiful work of craftsmanship and art. These perfectly built gorgeous scale models are a site to behold.   Each Nieuport 11 is handbuilt and finished using traditional materials. The structure is made from balsa ands then covered with silkspan tissue and then is finished out with scale markings, cowlings (handmade and carved, then painted), and all the little details, even the wing flying wires are carefully installed!   The Model comes with a set of super sub-micro linear actuators for the rudder and elevator controls, a sub-micro speed control, and a 2 gm receiver. These are installed into the aircraft and all controls are hooked up. A single cell 145 mah Li-Poly battery pack is also supplied and is wired and ready to go. The all-up flying weight of the model is a total of 30 gms (approx 1 ounce!).   The motor system is a geardrive micro motor and power goes to a handmolded carbon fiber prop. Everything is top-of-the-line first class on the Nieuport 11.   Controls are just right for this type of model and power is excellent. It will easily rise off a smooth surface and all controls are proportional. The best place to fly it is indoors and a small gym is adequate. You can expect run times in the 14-18 minute area. The flights are scale-like, the model is just plain wonderful to fly and it is a crowd pleaser.   Each painstakingly handcrafted model is completely Ready to Fly and comes with all specially designed super micro radio equipment installed. Each model comes on a particular frequency, so we also supply a radio transmitter crystal on matching frequency.   A charge jack is supplied with the model so you can hook this up to your Li-Poly charger. We carefully pack and double box the model so it will reach you in perfect condition.   When you're not flying the Nieuport 11, it makes a hadsome display in your living room or den cabinet.   The RTF version includes: Fully Built Nieuport 11 RTF with all radio and motor system installed 1S 145 Li-Poly battery pack with leads Charge lead for Li-Pioly battrey pack The ARF version includes: Fully Built Nieuport 11 Power System Propeller The ARC version includes: Fully Built Nieuport 11 Balsa airframe (not covered) Here is a description from the manufacturer:   The RC aircraft model of Nieuport 11 is of a balsa structure and is designed for indoor flying and in the case of good weather also for outdoor flying, with minimum demands on the flight area. The model is equipped with a dedicated special micro-RC system of Micro Invent making it possible to construct such a small and lightweight models on an outsourcing basis. The RC aircraft model of Nieuport 11 - Peanut size - is the first model of this type in the world. The flight properties of the model are remarkable, the model is capable of slow flying in an economic mode up to fast dynamic flying with aerobatic elements depending on the pilot's experience.   Characteristics of the Peanut Scale model: Model span     330 mm Flight weight of the model     25 g Wing loading     9.5 g / sqdm Controlled elements     rudder, elevator, motor Flight time     10 to 15 min. with 1x LiPoly 130 mAh Curve diameter     2.0 m Needed flying area      min. 15 x 10 x 6 m   The KIT The RC model kit for the aircraft “Nieuport 11” is of a balsa structure. The kit includes the main parts of the model built in the skeleton. The kit makes it possible for less experienced model builders to make constructions of the Nieuport 11 RC model.   Empty model weight is 10 g.   This Kit Includes: balsa structure of the fuselage, wings, rudder, elevator wing reinforcement and landing gear landing gear wheels, engine cowl coating paper with color impression assembly instructions on a step-by-step basis   You Will Need for the Peanut Version: Receiver     MINOR Servo     MCA2 (2 pcs) Power unit     GB45S7R Propeller     MCF5035 Battery     LIPO130-P  You Will Need for the Pistachio Version: Receiver      MINOR Servo      MCA1 (2 pcs) Power unit      GB40P6G Propeller      MCF3222 Battery      LIPO50-P  Note: RTFpeanut include complet RC equipment and LIPO130-P (1 pc) and MRC connector for charger (1 pc) ARF peanut include GB45S7R (1 pc) and MCF5035 (1 pc)   Note: RTF pistachio include complet RC equipment and LIPO50-P (1 pc) and MRC connector for charger (1 pc) ARF pistachio include GB32P6G (1 pc) and MCF3222 (1 pc)   KIT Photos:   Photos: Top view 3/4 view 3/4 view   Colors: Yellow White Green Red Multi-Color    Shipping -Blue Prime International (6 business days).   Note: This model is made by request, a 4 weeks delay should be expected.     Terms&Conditions