These are all the 3d printed kits we have available at the moment. If you need to print some kit from Thingiverse or any other stl site please ask us for a quote.
To calculate the price of a kit just click the "Order Prints" tab at the kit listing page, set your preferences and click "Calculate Price".
All about the 3D Printed Kits Printing Service
At the moment we carry more than 40 models from the leading designers in the 3D printed model airplanes industry. We have produced more than 750 kits and shipped to most of the western world countries, South America, far east and Oceania.
Specs: Span: 1240mm Print weight:320g Area 19,2 dm2 The C.G. is from 54% to 62% of the chord length from the leading edge Recommended Gear: 3s1800 or 3s 2200 or 4s 1300 28mm outrunner or 32mm...
| Klingberg Flying Wing Details: | |
| Type: | Glider |
| Class: | Radio-Control |
| Use: | Slope |
| Motor: | Electric-Powered |
| Wingspan: | 51.2 in. / 130 cm |
| Publisher: | AeroFred.com |
| Designer: | AeroFred.com |
| Date: | 03/2018 |
| Plan File Info: | |
| ID: | 100155 |
| File Size: | 18.8 MB |
| Downloads: | 3894 |
| Listing Editor: | derfred |
| Added: | 27/03/2018 10:06 |
| Updated: | 15/12/22 08:53:47pm |
The "Das Liddle Stik" is a smaller version of the famous Ugly Stick. It flies really well as you can see on the videos and it´s a perfect ailerons trainer. The landing gear can set as a...
| Das Liddle Stik Details: | |
| Type: | Airplane |
| Class: | Radio-Control |
| Use: | Sport |
| Motor: | Electric-Powered |
| Wingspan: | 45.7 in. / 116 cm |
| Publisher: | AeroFred.com |
| Designer: | Phil Kraft and Larry Leonard |
| Date: | 11/2017 |
| Plan File Info: | |
| ID: | 99742 |
| File Size: | 46.9 MB |
| Downloads: | 3228 |
| Listing Editor: | derfred |
| Added: | 22/11/2017 20:53 |
| Updated: | 15/12/22 08:44:16pm |
Wingspan: 1180 mm / 46.5 inch Lenght: 1070 mm / 42.1 inch Height: 260 mm / 10.2 inch Wing area: 21,2 dm2 / 2.3 square feet Wing loading: 15,1 g/dm2 / 4.9 oz/square feet Center of gravity: 84 mm /...
| Bungee Details: | |
| Type: | Glider |
| Class: | Radio-Control |
| Use: | Acro |
| Wingspan: | 46.5 in. / 118 cm |
| Publisher: | 3dlabprint |
| Date: | 05/2020 |
| Plan File Info: | |
| ID: | 102740 |
| File Size: | 1.2 MB |
| Downloads: | 477 |
| Listing Editor: | 3dlabprint |
| Added: | 13/07/2020 10:37 |
| Updated: | 06/08/20 10:38:55am |
PRINTED WEIGHT 420gr TAKE OF WEIGHT 750gr STALL SPEED 35kmh WING LOADING 57/gr/dm² WING SPAN 800mm...
| EGW-80 Ducted Fan Details: | |
| Type: | Airplane |
| Class: | Radio-Control |
| Motor: | Electric-Powered |
| Wingspan: | 31.5 in. / 80 cm |
| Publisher: | Eclipson Models |
| Designer: | Eclipson |
| Date: | 05/2020 |
| Plan File Info: | |
| ID: | 102742 |
| File Size: | 398.6 KB |
| Downloads: | 576 |
| Listing Editor: | Eclipson |
| Added: | 14/07/2020 10:25 |
| Updated: | 14/07/20 11:28:36am |
PRINTED WEIGHT 410gr TAKE OF WEIGHT 750gr STALL SPEED 27kmh WING LOADING 47/gr/dm² WING SPAN 1220mm (48") WING SURFACE ...
| Model D Details: | |
| Type: | Airplane |
| Class: | Radio-Control |
| Use: | Civilian |
| Motor: | Electric-Powered |
| Wingspan: | 48 in. / 122 cm |
| Publisher: | Eclipson Models |
| Designer: | Eclipson |
| Date: | 06/2020 |
| Plan File Info: | |
| ID: | 102737 |
| File Size: | 1.3 MB |
| Downloads: | 412 |
| Listing Editor: | Eclipson |
| Added: | 13/07/2020 08:15 |
| Updated: | 13/07/20 09:18:14am |
STRUCTURE WEIGHT 480gr TAKE OF WEIGHT* 780gr STALL SPEED 30kmh MAX GLIDE RATIO 18 MIN SINK RATE 0,58m/s WING LOADING ...
| Prandtl Details: | |
| Type: | Airplane |
| Class: | Radio-Control |
| Wingspan: | 63.8 in. / 162 cm |
| Designer: | Eclipson |
| Plan File Info: | |
| ID: | 102736 |
| File Size: | 580.7 KB |
| Downloads: | 810 |
| Listing Editor: | Eclipson |
| Added: | 13/07/2020 08:07 |
| Updated: | 13/07/20 09:11:39am |
One word: "Astonishing" The guys at 3dLabs listened and here it is, the new B-25 is a spectacular warbird, it´s big, it´s easy to build, it flies really well, it sounds menacing, just...
| B-25J Mitchell Details: | |
| Type: | Airplane |
| Class: | Radio-Control |
| Use: | Bomber |
| Motor: | Electric-Powered |
| Wingspan: | 67.7 in. / 172 cm |
| Publisher: | 3DLabPrint |
| Designer: | 3dlabprint |
| Date: | 12/2019 |
| Plan File Info: | |
| ID: | 102402 |
| File Size: | 3.7 MB |
| Downloads: | 1719 |
| Listing Editor: | 3dlabprint |
| Added: | 04/12/2019 20:00 |
| Updated: | 16/06/20 08:28:49am |
The long wait has ended, finally we have the famous and much requested Focke-Wulf as a printable model! Here are the specs: Wingspan: 1236 mm / 48.2 inch Lenght: 870 mm / 33.9 inch Height: 178 mm /...
| TA-152H Focke-Wulf Details: | |
| Type: | Airplane |
| Class: | Radio-Control |
| Use: | Fighter |
| Motor: | Electric-Powered |
| Wingspan: | 48.8 in. / 124 cm |
| Publisher: | 3dlabprint |
| Designer: | 3dlabprint |
| Date: | 02/2020 |
| Plan File Info: | |
| ID: | 102490 |
| File Size: | 2.5 MB |
| Downloads: | 616 |
| Listing Editor: | 3dlabprint |
| Added: | 08/02/2020 09:37 |
| Updated: | 16/06/20 08:28:32am |
Proteus Flying Wing, Slope Soaring version
| Proteus Details: | |
| Type: | Glider |
| Class: | Radio-Control |
| Use: | Slope |
| Motor: | Not-Powered |
| Wingspan: | 47.2 in. / 120 cm |
| Publisher: | Thingiverse |
| Designer: | Kit Adams |
| Plan File Info: | |
| ID: | 101467 |
| File Size: | 5.5 MB |
| Downloads: | 1543 |
| Listing Editor: | cgraf |
| Added: | 01/07/2018 10:18 |
| Updated: | 08/06/19 08:44:47am |
The TL Stream is one of the best ultralight airplanes available right now on the market. The airplane has been designed and manufactured by the European company TL-ultralight. By using the latest...
| TL Stream Details: | |
| Type: | Airplane |
| Class: | Radio-Control |
| Use: | Civilian |
| Motor: | Electric-Powered |
| Wingspan: | 44.5 in. / 113 cm |
| Publisher: | Eclipson Models |
| Designer: | Eclipson |
| Date: | 05/2020 |
| Plan File Info: | |
| ID: | 102633 |
| File Size: | 444.2 KB |
| Downloads: | 252 |
| Listing Editor: | Eclipson |
| Added: | 16/05/2020 17:35 |
| Updated: | 05/06/20 10:47:02am |
Eclipson EGW-80 also known as the "Graywing" was designed to accomplish 3 main objectives: Cheap, fast and easy to fly. It is cheaper because you will only need to use 400 grams of normal...
| EGW-80 Details: | |
| Type: | Airplane |
| Class: | Radio-Control |
| Use: | Sport |
| Motor: | Electric-Powered |
| Wingspan: | 31.5 in. / 80 cm |
| Publisher: | Eclipson Models |
| Designer: | Eclipson |
| Date: | 04/2020 |
| Plan File Info: | |
| ID: | 102574 |
| File Size: | 480.6 KB |
| Downloads: | 989 |
| Listing Editor: | Eclipson |
| Added: | 13/04/2020 13:14 |
| Updated: | 05/06/20 10:46:27am |
This is a scaled up version of the PZL-11 Model that can be found here: https://aerofred.com/details.php?image_id=102309 As with all scaled versions this one will also require adjustments on your...
| PZL P-11c (30% Scaled up) Details: | |
| Type: | Airplane |
| Class: | Radio-Control |
| Use: | Fighter |
| Motor: | Electric-Powered |
| Wingspan: | 56.3 in. / 143 cm |
| Publisher: | 3DLabGang |
| Designer: | PrintBeat |
| Plan File Info: | |
| ID: | 102354 |
| File Size: | 766.6 KB |
| Downloads: | 522 |
| Listing Editor: | 3dlabprint |
| Added: | 05/11/2019 18:01 |
| Updated: | 29/05/20 03:20:09pm |
Highly detailed scale model of the pre WWII polish fighter by PrintBeat team. It has wingspan of 1100 mm and many scale details as you can see on the photos. Length: 78,5 cm / 30,9 inch Wingspan:...
| PZL P-11c Details: | |
| Type: | Airplane |
| Class: | Radio-Control |
| Use: | Fighter |
| Motor: | Electric-Powered |
| Wingspan: | 43.3 in. / 110 cm |
| Publisher: | 3DLabGang |
| Designer: | PrintBeat |
| Plan File Info: | |
| ID: | 102309 |
| File Size: | 766.6 KB |
| Downloads: | 390 |
| Listing Editor: | 3dlabprint |
| Added: | 09/10/2019 17:01 |
| Updated: | 29/05/20 03:19:41pm |
Wingspan: 850 mm / 33.5 inch Lenght: 750 mm / 29.5 inch Height: 170 mm / 6.7 inch Wing area: 15,9 dm2 / 1.61 square foot Wing loading: 31 g/dm2 / 15.3 oz/square foot Center of gravity: 60 mm / 2.34...
| VL PYÖRREMYRSKY Details: | |
| Type: | Airplane |
| Class: | Radio-Control |
| Use: | Fighter |
| Motor: | Electric-Powered |
| Wingspan: | 33.5 in. / 85 cm |
| Plan File Info: | |
| ID: | 102634 |
| File Size: | 2.2 MB |
| Downloads: | 287 |
| Listing Editor: | 3dlabprint |
| Added: | 16/05/2020 17:48 |
| Updated: | 16/05/20 06:53:41pm |
3D Printed on PLA bioplastic MESSERSCHMITT BF 109 F or H The F Version is 89cm wingspan and cannot have landing gear. The H version is 103cm wingspan and has a fixed landing gear. Please choose the...
| MESSERSCHMITT BF 109 F or H Details: | |
| Type: | Airplane |
| Class: | Radio-Control |
| Use: | Fighter |
| Motor: | Electric-Powered |
| Wingspan: | 35 in. / 89 cm |
| Publisher: | 3DLabPrint |
| Designer: | 3DLabPrint |
| Date: | 06/2016 |
| Plan File Info: | |
| ID: | 99261 |
| File Size: | 444.6 KB |
| Downloads: | 1032 |
| Listing Editor: | 3dlabprint |
| Added: | 10/04/2017 12:54 |
| Updated: | 02/05/20 02:25:16pm |
3D printed version of Nigel Lamb´s MXS-R. This is a versatile model that can be used like as sports, race or aerobatic plane, compatible with PLA/PETG or LW-PLA, by choosing one or the other...
| MXS-R Details: | |
| Type: | Airplane |
| Class: | Radio-Control |
| Use: | Acro |
| Motor: | Electric-Powered |
| Wingspan: | 53.1 in. / 135 cm |
| Publisher: | Eclipson Models |
| Designer: | Eclipson |
| Date: | 02/2020 |
| Plan File Info: | |
| ID: | 102573 |
| File Size: | 552.4 KB |
| Downloads: | 683 |
| Listing Editor: | Eclipson |
| Added: | 13/04/2020 12:54 |
| Updated: | 13/04/20 03:21:53pm |
The ERCO Ercoupe is a general aviation aircraft from a time when flying was immensely popular. Advertised as “the world’s safest plane”, the Ercoupe had great visibility, resistance to spins,...
| Erco Ercoupe Details: | |
| Type: | Airplane |
| Class: | Radio-Control |
| Use: | Civilian |
| Motor: | Electric-Powered |
| Wingspan: | 59.1 in. / 150 cm |
| Publisher: | LoftedAero |
| Designer: | Eric |
| Date: | 01/2019 |
| Plan File Info: | |
| ID: | 101837 |
| File Size: | 4.4 MB |
| Downloads: | 607 |
| Listing Editor: | LoftedAero |
| Added: | 09/01/2019 12:40 |
| Updated: | 09/04/20 08:47:36pm |
The SZD-21-2B „Kobuz 3“ is originally designed for aerobatic flight. This model is designed as a thermal glider with scale flight characteristics. This is not a beginner plane, advanced piloting...
| SZD-21-2B (KOBUZ 3) Details: | |
| Type: | Glider |
| Class: | Radio-Control |
| Use: | Sport |
| Motor: | Electric-Powered |
| Wingspan: | 110.2 in. / 280 cm |
| Publisher: | 3DLabGang |
| Designer: | Marcus Desel |
| Plan File Info: | |
| ID: | 102310 |
| File Size: | 555.4 KB |
| Downloads: | 598 |
| Listing Editor: | 3dlabprint |
| Added: | 09/10/2019 17:17 |
| Updated: | 02/03/20 08:08:39am |
EWB-160 also known as “The Blackwing” is a state-of-the-art 3D printed UAV. The latest technologies and innovations have been used to achieve a unique aircraft with spectacular performance. 3D...
| EBW-160 UAV Details: | |
| Type: | Airplane |
| Class: | Autonomous-UAV |
| Use: | Observation |
| Motor: | Electric-Powered |
| Wingspan: | 63 in. / 160 cm |
| Publisher: | Eclipson Models |
| Designer: | Eclipson |
| Date: | 06/2019 |
| Plan File Info: | |
| ID: | 102152 |
| File Size: | 640.8 KB |
| Downloads: | 1027 |
| Listing Editor: | Eclipson |
| Added: | 27/06/2019 16:44 |
| Updated: | 26/02/20 07:35:59pm |
If you just want a great flying wing, without the FPV equipment, the R/C (Radio Controlled) Version of your Eclipson EBW-160 will suit your needs. This model is extremely easy to print, build,...
| EBW-160 R/C Details: | |
| Type: | Airplane |
| Class: | Radio-Control |
| Use: | Sport |
| Motor: | Electric-Powered |
| Wingspan: | 63 in. / 160 cm |
| Publisher: | Eclipson Models |
| Designer: | Eclipson |
| Date: | 06/2019 |
| Plan File Info: | |
| ID: | 102153 |
| File Size: | 867.6 KB |
| Downloads: | 834 |
| Listing Editor: | Eclipson |
| Added: | 27/06/2019 16:55 |
| Updated: | 26/02/20 07:35:53pm |
The Joker is a 3D printed V-tail glider/hotliner with 1710 mm wingspan by Jaroslav Kovac. 4 servo wing includes ailerons and flaps, so it allows multiple flight configurations for every flight mode....
| Joker Details: | |
| Type: | Glider |
| Class: | Radio-Control |
| Motor: | Electric-Powered |
| Wingspan: | 67.3 in. / 171 cm |
| Publisher: | 3dlabgang |
| Designer: | Jooslav Kovac |
| Plan File Info: | |
| ID: | 102458 |
| File Size: | 6.1 MB |
| Downloads: | 711 |
| Listing Editor: | 3dlabprint |
| Added: | 17/01/2020 14:25 |
| Updated: | 13/02/20 05:21:12pm |
Another beautiful model from Eclipson Planes, this time a V-tail motor glider. WING SPAN 1,370mm WING SURFACE 15,9dm2 WING ASPECT RATIO 11,8 WING AIRFOIL ...
| Model V Details: | |
| Type: | Glider |
| Class: | Radio-Control |
| Use: | Sport |
| Motor: | Electric-Powered |
| Wingspan: | 53.9 in. / 137 cm |
| Publisher: | Eclipson Models |
| Designer: | Eclipson |
| Date: | 10/2019 |
| Plan File Info: | |
| ID: | 102313 |
| File Size: | 952.1 KB |
| Downloads: | 601 |
| Listing Editor: | Eclipson |
| Added: | 10/10/2019 10:31 |
| Updated: | 15/11/19 02:04:57pm |
Scale ca.: 18 : 1 Wingspan Floats retracted: 1702 mm Wingspan Floats down: 1613 mm Length: 1046 mm Print wight: 1480 g Wight fully equipped ca.: 2500 g Wing profle: Clark YH modifed Speed: Not...
| CONSOLIDATED PBY CATALINA Details: | |
| Type: | Airplane |
| Class: | Radio-Control |
| Use: | Observation |
| Motor: | Electric-Powered |
| Wingspan: | 63.4 in. / 161 cm |
| Publisher: | 3DLabGang |
| Designer: | Martin Klöpfer |
| Plan File Info: | |
| ID: | 102316 |
| File Size: | 3.6 MB |
| Downloads: | 567 |
| Listing Editor: | 3dlabprint |
| Added: | 11/10/2019 08:31 |
| Updated: | 31/10/19 01:36:00pm |
Length: 850mm Wingspan: 1055mm Height: 290mm Air-foil: SD6060 Print weight: 685g Take-off weight (6s 1800 lipo): 1200g Max take-off weight: 1500g Never exceed speed, VNE: 200km/h Design manoeuvring...
| VOUGHT F4U CORSAIR 1/12 SCALE Details: | |
| Type: | Airplane |
| Class: | Radio-Control |
| Use: | Pylon-Racer |
| Motor: | Electric-Powered |
| Wingspan: | 39.4 in. / 100 cm |
| Publisher: | 3DLabGang |
| Designer: | Frank Lesch |
| Plan File Info: | |
| ID: | 102319 |
| File Size: | 1.3 MB |
| Downloads: | 418 |
| Listing Editor: | 3dlabprint |
| Added: | 11/10/2019 16:47 |
| Updated: | 11/10/19 05:48:38pm |
MACCHI MC.200 “SAETTA” The Macchi MC.200 “Saetta” is not a very common plane on RC model scene. Creating very detailed replicas of less known planes is a speciality of PrintBeat team,...
| MACCHI MC.200 “SAETTA” Details: | |
| Type: | Airplane |
| Class: | Radio-Control |
| Use: | Fighter |
| Motor: | Electric-Powered |
| Wingspan: | 52.8 in. / 134 cm |
| Publisher: | 3DLabGang |
| Designer: | PrintBeat |
| Plan File Info: | |
| ID: | 102307 |
| File Size: | 731.3 KB |
| Downloads: | 368 |
| Listing Editor: | 3dlabprint |
| Added: | 09/10/2019 10:45 |
| Updated: | 09/10/19 06:05:36pm |
The Piranha is a fast yet easy to fly small sports plane with retractable landing gear by Wolfgang Vogel based on a 70’s fibre/foamcore model airplane. You will need: 2x 9g servos plus 1 Corona...
| Piranha Details: | |
| Type: | Airplane |
| Class: | Radio-Control |
| Use: | Sport |
| Motor: | Electric-Powered |
| Wingspan: | 37.4 in. / 95 cm |
| Publisher: | 3dLabGang |
| Designer: | Wolfgang Vogel |
| Plan File Info: | |
| ID: | 102308 |
| File Size: | 2.9 MB |
| Downloads: | 140 |
| Listing Editor: | 3dlabprint |
| Added: | 09/10/2019 12:40 |
| Updated: | 09/10/19 01:40:24pm |
3D Printed P47 N-15 THUNDERBOLT This is a very well designed P-47 Thunderbolt with rudder and retractable landing gear. I know the pictures don´t make justice to this model but printed in...
| P47 N-15 THUNDERBOLT Details: | |
| Type: | Airplane |
| Class: | Radio-Control |
| Use: | Fighter |
| Motor: | Electric-Powered |
| Wingspan: | 45.7 in. / 116 cm |
| Publisher: | 3DLabPrint |
| Designer: | 3DLabPrint |
| Date: | 06/2016 |
| Plan File Info: | |
| ID: | 99264 |
| File Size: | 468.5 KB |
| Downloads: | 1062 |
| Listing Editor: | 3dlabprint |
| Added: | 10/04/2017 19:58 |
| Updated: | 30/08/19 04:07:54pm |
Wingspan: 1235 mm / 48.2 inch Lenght: 965 mm / 37.7 inch Height: 240 mm / 9.4 inch Wing area: 28 dm2 / 3.0 square foot Wing loading: 53 g/dm2 / 17.6 oz/square foot Center of gravity: 120 mm / 4,6...
| IL-2 M3 STURMOVIK Details: | |
| Type: | Airplane |
| Class: | Radio-Control |
| Use: | Fighter |
| Motor: | Electric-Powered |
| Wingspan: | 48.4 in. / 123 cm |
| Publisher: | 3DLabPrint |
| Designer: | 3dlabprint |
| Date: | 03/2019 |
| Plan File Info: | |
| ID: | 102042 |
| File Size: | 2.0 MB |
| Downloads: | 763 |
| Listing Editor: | 3dlabprint |
| Added: | 01/04/2019 11:24 |
| Updated: | 30/08/19 04:07:03pm |
Same as this one: https://aerofred.com/details.php?image_id=99261 But scaled to 1.4m span Wingspan:1,4m Print weight: 950-1000g Issues with the scaling up: 1. Mini servos will fit but may need...
| Messerchmitt BF 109 H (ScaledUp) Details: | |
| Type: | Airplane |
| Class: | Radio-Control |
| Use: | Fighter |
| Motor: | Electric-Powered |
| Wingspan: | 55.1 in. / 140 cm |
| Publisher: | 3dlabPrint |
| Designer: | 3dlabprint |
| Date: | 05/2018 |
| Plan File Info: | |
| ID: | 100239 |
| File Size: | 807.0 KB |
| Downloads: | 1086 |
| Listing Editor: | 3dlabprint |
| Added: | 30/04/2018 10:58 |
| Updated: | 17/07/19 08:40:26am |
You simply have to try this one, our very best and most advanced plane so far. Using all the experience gained from our previously released EDGE 540 and its 64” version we designed this even bigger...
| Edge 540 (73in) Details: | |
| Type: | Airplane |
| Class: | Radio-Control |
| Use: | Sport |
| Motor: | Electric-Powered |
| Wingspan: | 73 in. / 185.4 cm |
| Publisher: | 3dLabPrint |
| Designer: | 3dlabprint |
| Date: | 06/2019 |
| Plan File Info: | |
| ID: | 102142 |
| File Size: | 4.1 MB |
| Downloads: | 1232 |
| Listing Editor: | 3dlabprint |
| Added: | 17/06/2019 08:26 |
| Updated: | 27/06/19 05:27:27pm |
Beautifully redesigned larger and 3D flight capable version of the classic and extremely popular 3DLabPrint Edge 540 Can use printed landing gear or a CF one. Length: 1620 mm / 64 inch Wingspan:...
| Edge 540 (64in) Details: | |
| Type: | Airplane |
| Class: | Radio-Control |
| Use: | Acro |
| Motor: | Electric-Powered |
| Wingspan: | 64 in. / 162.6 cm |
| Publisher: | 3dLabPrint |
| Designer: | 3dlabprint |
| Date: | 12/2018 |
| Plan File Info: | |
| ID: | 101763 |
| File Size: | 1.7 MB |
| Downloads: | 1142 |
| Listing Editor: | 3dlabprint |
| Added: | 03/12/2018 15:05 |
| Updated: | 17/06/19 09:22:48am |
Wingspan: 720 mm (920 mm when using BigWing version) Length: 578 mm Est. weight: 450 g CG: 26 mm Suggested throws: Elevator: 3-5 mm Ailerons: 4-6 mm Elevator should be hinged with CA hinges....
| NUCKING FUTS Details: | |
| Class: | Radio-Control |
| Use: | Pylon-Racer |
| Motor: | Electric-Powered |
| Wingspan: | 28.3 in. / 72 cm |
| Publisher: | Lynxman |
| Designer: | Lynxman |
| Date: | 01/2019 |
| Plan File Info: | |
| ID: | 102041 |
| File Size: | 1.4 MB |
| Downloads: | 810 |
| Listing Editor: | Lynxman |
| Added: | 01/04/2019 11:05 |
| Updated: | 06/04/19 06:35:55pm |
I used to fly a Pilot Baby decades ago. It was a fun little plane, even with heavy 540 car motor and 7-cell sub C nicads, and only elevator and rudder control. I decided to design a printable version...
| Pilot Baby Details: | |
| Type: | Airplane |
| Class: | Radio-Control |
| Use: | Sport |
| Motor: | Electric-Powered |
| Wingspan: | 35.8 in. / 91 cm |
| Publisher: | Lynxman |
| Designer: | Lynxman |
| Date: | 03/2019 |
| Plan File Info: | |
| ID: | 102040 |
| File Size: | 840.9 KB |
| Downloads: | 691 |
| Listing Editor: | Lynxman |
| Added: | 01/04/2019 09:33 |
| Updated: | 06/04/19 06:35:21pm |
3D Printed AICHI M6A Nanzan This is the Seiran without floats. Extra parts: 4 different length motor mounts Lenght: 910 mm (35,8 in) Wingspan: 1070 mm (42.12 in) Height: 380 mm (14.9 in) Wing...
| AICHI M6A Nanzan Details: | |
| Type: | Airplane |
| Class: | Radio-Control |
| Use: | Fighter |
| Motor: | Electric-Powered |
| Wingspan: | 42.1 in. / 107 cm |
| Publisher: | 3DLabPrint |
| Designer: | 3DLabPrint |
| Date: | 11/2016 |
| Plan File Info: | |
| ID: | 101465 |
| File Size: | 1.1 MB |
| Downloads: | 620 |
| Listing Editor: | 3dlabprint |
| Added: | 29/06/2018 13:48 |
| Updated: | 26/03/19 04:51:33pm |
The famous Dusty from the Disney movie "Planes" will now have many brothers and sister in all the colours of the rainbow (or 3d print filament :) Another surprising creation from Stepan of...
| Piper Pawnee (Dusty) Details: | |
| Type: | Airplane |
| Class: | Radio-Control |
| Use: | Crop-Duster |
| Motor: | Electric-Powered |
| Wingspan: | 48.8 in. / 124 cm |
| Publisher: | 3dLabPrint |
| Designer: | 3dlabprint |
| Date: | 12/2017 |
| Plan File Info: | |
| ID: | 99818 |
| File Size: | 1.2 MB |
| Downloads: | 1726 |
| Listing Editor: | 3dlabprint |
| Added: | 14/12/2017 12:22 |
| Updated: | 15/03/19 07:47:13am |
Probably the most anticipated model from the 3dLabs guys has landed, behold the mighty (enormous, astounding, unbelievable...) Corsair :) This one blew my mind, no wonder it took so long to design,...
| F-4U Corsair Details: | |
| Type: | Airplane |
| Class: | Radio-Control |
| Use: | Fighter |
| Motor: | Electric-Powered |
| Wingspan: | 74.8 in. / 190 cm |
| Publisher: | 3dLabPrint |
| Designer: | 3dLabprint |
| Date: | 03/2018 |
| Plan File Info: | |
| ID: | 100167 |
| File Size: | 1.5 MB |
| Downloads: | 1560 |
| Listing Editor: | 3dlabprint |
| Added: | 30/03/2018 11:02 |
| Updated: | 06/03/19 09:26:40am |
3D Printed P-38 LIGHTNING The 3DLabPrint P-38 is a superb model airplane designed by Stepen Dokoupil from the Czech Republic and flown by hundreds, if not thousands of modellers around the...
| P-38 LIGHTNING Details: | |
| Type: | Airplane |
| Class: | Radio-Control |
| Use: | Fighter |
| Motor: | Electric-Powered |
| Wingspan: | 55.5 in. / 141 cm |
| Publisher: | 3DLabPrint |
| Designer: | 3DLabPrint |
| Date: | 11/2016 |
| Plan File Info: | |
| ID: | 99272 |
| File Size: | 959.8 KB |
| Downloads: | 2057 |
| Listing Editor: | 3dlabprint |
| Added: | 21/02/2018 18:30 |
| Updated: | 08/02/19 08:37:10am |
This time Alvaro from Eclipson Models presented us with an versatile convertible floatplane/taildragger with a rectangular wing and a low wing loading. The new Model T! WING SPAN ...
| Eclipson Model T Details: | |
| Type: | Airplane |
| Class: | Radio-Control |
| Use: | Sport |
| Motor: | Electric-Powered |
| Wingspan: | 45.7 in. / 116 cm |
| Publisher: | Eclipson Models |
| Designer: | Eclipson |
| Date: | 12/2018 |
| Plan File Info: | |
| ID: | 101836 |
| File Size: | 740.4 KB |
| Downloads: | 751 |
| Listing Editor: | Eclipson |
| Added: | 09/01/2019 11:32 |
| Updated: | 29/01/19 01:36:55pm |
3D Printed AICHI M6A SEIRAN Extra parts: 4 different length motor mounts printed in PET-G Lenght: 910 mm (35,8 in) Wingspan: 1070 mm (42.12 in) Height: 380 mm (14.9 in) Wing area: 22.8 dm2 Wing...
| AICHI M6A Seiran Details: | |
| Type: | Airplane |
| Class: | Radio-Control |
| Use: | Fighter |
| Motor: | Electric-Powered |
| Wingspan: | 42.1 in. / 107 cm |
| Publisher: | 3DLabPrint |
| Designer: | 3DLabPrint |
| Date: | 11/2016 |
| Plan File Info: | |
| ID: | 99283 |
| File Size: | 1.1 MB |
| Downloads: | 819 |
| Listing Editor: | 3dlabprint |
| Added: | 16/04/2017 18:41 |
| Updated: | 07/12/18 09:55:17am |
This Mig-15 is an engineering wonder and a true work of art. The most complex model from 3dlabprint guys so far. This plane uses retracts and can also take off on his belly on grass, this is shown...
| Mig-15 Details: | |
| Type: | Airplane |
| Class: | Radio-Control |
| Use: | Fighter |
| Motor: | Electric-Powered |
| Wingspan: | 48 in. / 122 cm |
| Publisher: | 3DLabPrint |
| Designer: | 3DLabPrint |
| Date: | 05/2017 |
| Plan File Info: | |
| ID: | 99416 |
| File Size: | 1.6 MB |
| Downloads: | 1683 |
| Listing Editor: | 3dlabprint |
| Added: | 30/05/2017 21:51 |
| Updated: | 07/12/18 09:54:48am |
QB20 inspired trainer. Or a very close copy :) This is a spectacular model that will fly well and resist the hardest landings from a beginner pilot. It can be printed on one single colour or in a...
| QTrainer Details: | |
| Type: | Airplane |
| Class: | Radio-Control |
| Use: | Trainer |
| Motor: | Electric-Powered |
| Wingspan: | 51.2 in. / 130 cm |
| Publisher: | 3DLabPrint |
| Designer: | 3dlabprint |
| Date: | 06/2017 |
| Plan File Info: | |
| ID: | 99482 |
| File Size: | 1.2 MB |
| Downloads: | 2434 |
| Listing Editor: | 3dlabprint |
| Added: | 27/06/2017 16:27 |
| Updated: | 07/12/18 09:54:32am |
3dlabprint listened to their customers suggestions and updated their Mig-15, it is now bigger, stiffer and with more features. This one is 15% larger, has flaps and the gear compartment was redone...
| Mig-15 Bis Details: | |
| Type: | Airplane |
| Class: | Radio-Control |
| Use: | Fighter |
| Motor: | Electric-Powered |
| Wingspan: | 54.3 in. / 138 cm |
| Publisher: | 3DLabPrint |
| Designer: | 3DLabPrint |
| Date: | 05/2017 |
| Plan File Info: | |
| ID: | 101477 |
| File Size: | 2.4 MB |
| Downloads: | 792 |
| Listing Editor: | 3dlabprint |
| Added: | 06/07/2018 12:16 |
| Updated: | 07/12/18 09:53:11am |
According to 3DLabPrint this is the most requested model of all time! I´m starting to repeat myself here but the truth is that each plane they design is better than the previous one and the Sabre...
| F-86 Sabre Details: | |
| Type: | Airplane |
| Class: | Radio-Control |
| Use: | Fighter |
| Motor: | Electric-Powered |
| Wingspan: | 55.9 in. / 142 cm |
| Publisher: | 3DLabPrint |
| Designer: | 3DLabPrint |
| Date: | 09/2018 |
| Plan File Info: | |
| ID: | 101712 |
| File Size: | 2.2 MB |
| Downloads: | 1188 |
| Listing Editor: | 3dlabprint |
| Added: | 23/10/2018 19:34 |
| Updated: | 07/12/18 09:52:47am |
3D Printed Kit on PLA Zivko EDGE Hannes Arch. This is a great scale model of the famous Zivko Edge. This model is very well designed and flies well. Thanks to its large control surfaces it can...
| Zivko EDGE 540 Hannes Arch Details: | |
| Type: | Airplane |
| Class: | Radio-Control |
| Use: | Acro |
| Motor: | Electric-Powered |
| Wingspan: | 46.5 in. / 118 cm |
| Publisher: | 3DLabPrint |
| Designer: | 3DLabPrint |
| Date: | 06/2016 |
| Plan File Info: | |
| ID: | 99259 |
| File Size: | 478.5 KB |
| Downloads: | 1878 |
| Listing Editor: | 3dlabprint |
| Added: | 06/09/2017 08:11 |
| Updated: | 03/12/18 03:14:28pm |
Designed by Alvaro Trespaderne from Spain, the model Y is a nice little high wing highly efficient trainer/sports plane. It´s simple construction and nature inspired solutions make it an easy build...
| Eclipson Y Details: | |
| Type: | Airplane |
| Class: | Radio-Control |
| Use: | Trainer |
| Motor: | Electric-Powered |
| Wingspan: | 39.4 in. / 100 cm |
| Publisher: | Eclipson Models |
| Designer: | Eclipson |
| Date: | 01/2018 |
| Plan File Info: | |
| ID: | 101553 |
| File Size: | 267.1 KB |
| Downloads: | 832 |
| Listing Editor: | Eclipson |
| Added: | 01/08/2018 08:45 |
| Updated: | 24/10/18 09:18:09am |
Required RC Parts: Motor: Emax 2306-2400kv or equivalent. This motor weighs around 34 grams and puts out 1700 grams of thrust. ESC: 35A for the recommended motor Prop: 6045 HQ Style Prop Servos: 2x...
| Northern Pike Details: | |
| Type: | Airplane |
| Class: | Radio-Control |
| Use: | Sport |
| Motor: | Electric-Powered |
| Wingspan: | 36 in. / 91.4 cm |
| Publisher: | Localfiend |
| Designer: | localfiend |
| Date: | 08/2018 |
| Plan File Info: | |
| ID: | 101582 |
| File Size: | 877.4 KB |
| Downloads: | 260 |
| Listing Editor: | localfiend3d |
| Added: | 10/08/2018 10:39 |
| Updated: | 22/10/18 08:12:48am |
3D Printed 1.7 meter/67in span Spitfire MK IX This Spitfire MK IX is a work of art and an engineering marvel... And it flies so well. I thought that after seeing the Mig-15 I had seen it all but...
| Spitfire MK IX Details: | |
| Type: | Airplane |
| Class: | Radio-Control |
| Use: | Fighter |
| Motor: | Electric-Powered |
| Wingspan: | 66.9 in. / 170 cm |
| Publisher: | 3DLabPrint |
| Designer: | 3DLabPrint |
| Date: | 08/2017 |
| Plan File Info: | |
| ID: | 99535 |
| File Size: | 1.1 MB |
| Downloads: | 1788 |
| Listing Editor: | 3dlabprint |
| Added: | 04/09/2017 11:52 |
| Updated: | 12/09/18 11:10:43am |
This is a scaled up version of the 3dlabprint P-38 with 183cm wingspan and 2300g of bare print weight. Apart from being a huge model and probably a great flier, the original is so this one can only...
| P38 Lightning (Scaled Up) Details: | |
| Type: | Airplane |
| Class: | Radio-Control |
| Use: | Fighter |
| Motor: | Electric-Powered |
| Wingspan: | 72 in. / 183 cm |
| Publisher: | 3dlabPrint |
| Designer: | 3dlabprint |
| Date: | 04/2018 |
| Plan File Info: | |
| ID: | 100234 |
| File Size: | 959.8 KB |
| Downloads: | 1571 |
| Listing Editor: | 3dlabprint |
| Added: | 28/04/2018 16:29 |
| Updated: | 12/09/18 11:09:41am |
The Eclipson Z is an evolution from the model Y, the same stream lined fuselage but low wing. The low wing with curved wingtips give this model great stability and controlled flight making it a good...
| Eclipson Z Details: | |
| Type: | Airplane |
| Class: | Radio-Control |
| Use: | Sport |
| Motor: | Electric-Powered |
| Wingspan: | 43.3 in. / 110 cm |
| Publisher: | Eclipson Models |
| Designer: | Eclipson |
| Date: | 07/2018 |
| Plan File Info: | |
| ID: | 101554 |
| File Size: | 313.0 KB |
| Downloads: | 1148 |
| Listing Editor: | Eclipson |
| Added: | 01/08/2018 11:16 |
| Updated: | 29/08/18 08:47:04am |
3D Printed STEARMAN PT-17 KAYDET /// This model was reviewed on RCM&E July 2018 /// The article can be downloaded below or you can purchase the magazine that is currently on sale. This...
| STEARMAN PT-17 KAYDET Details: | |
| Type: | Airplane |
| Class: | Radio-Control |
| Use: | Trainer |
| Motor: | Electric-Powered |
| Wingspan: | 48 in. / 122 cm |
| Publisher: | 3DLabPrint |
| Designer: | 3dlabprint |
| Date: | 10/2016 |
| Plan File Info: | |
| ID: | 99267 |
| File Size: | 1.6 MB |
| Downloads: | 1893 |
| Listing Editor: | 3dlabprint |
| Added: | 13/04/2017 13:15 |
| Updated: | 20/08/18 11:49:30pm |
3d Printed Cessna 152 Kit Includes a mod (an extra part) to allow you to fix the motor from the back side so it does not gets too hot and also includes an extra cowl that instead of the motor...
| Cessna 152 Details: | |
| Type: | Airplane |
| Class: | Radio-Control |
| Use: | Civilian |
| Motor: | Electric-Powered |
| Wingspan: | 61.4 in. / 156 cm |
| Publisher: | 3DLabPrint |
| Designer: | 3dLabPrint |
| Date: | 10/2016 |
| Plan File Info: | |
| ID: | 99266 |
| File Size: | 937.2 KB |
| Downloads: | 1450 |
| Listing Editor: | 3dlabprint |
| Added: | 11/04/2017 11:06 |
| Updated: | 13/08/18 12:56:27pm |
This is my version of the classic "ugly" stick RC planes it has 1166mm wing span (46 inch) and is Fully 3d printed using PLA plastic. The printed weight is about 1200g(2.7lbs) & all up...
| 3d Printed "Ugly"Stick Details: | |
| Type: | Airplane |
| Class: | Radio-Control |
| Use: | Multirole |
| Motor: | Electric-Powered |
| Wingspan: | 46 in. / 116.8 cm |
| Designer: | Todd Francis |
| Date: | 01/2017 |
| Plan File Info: | |
| ID: | 99401 |
| File Size: | 4.0 MB |
| Downloads: | 906 |
| Listing Editor: | tfrancis |
| Added: | 25/05/2017 18:10 |
| Updated: | 09/08/18 02:32:02pm |
3D Printed SPITFIRE MK XVI This Spitfire is a 3 channel plane (throttle, elevator and ailerons) and requires something similar to a Turnigy D3530/14 1100KV (or a 3536 about 1000 kv), a 30A ESC and...
| SPITFIRE MK XVI Details: | |
| Type: | Airplane |
| Class: | Radio-Control |
| Use: | Fighter |
| Motor: | Electric-Powered |
| Wingspan: | 38.2 in. / 97 cm |
| Publisher: | 3DLabPrint |
| Designer: | 3DLabPrint |
| Date: | 06/2016 |
| Plan File Info: | |
| ID: | 99258 |
| File Size: | 443.8 KB |
| Downloads: | 1281 |
| Listing Editor: | 3dlabprint |
| Added: | 09/04/2017 11:03 |
| Updated: | 04/06/18 02:45:34pm |
3D Printed P51-D MUSTANG This plane has two possible front sections, the one you see in the images above and one with the inner structure pulled back about 2.5cm. This second front section allows...
| P51-D MUSTANG Details: | |
| Type: | Airplane |
| Class: | Radio-Control |
| Use: | Fighter |
| Motor: | Electric-Powered |
| Wingspan: | 39 in. / 99 cm |
| Publisher: | 3DLabPrint |
| Designer: | 3DLabPrint |
| Date: | 06/2016 |
| Plan File Info: | |
| ID: | 99263 |
| File Size: | 390.1 KB |
| Downloads: | 1588 |
| Listing Editor: | 3dlabprint |
| Added: | 10/04/2017 19:32 |
| Updated: | 04/06/18 02:45:06pm |
3D Printed MESSERSCHMITT BF 109T This Me-109T is a great scale plane, 4 chanels and includes 3d printed gauges to make the bent piano wire landing gears. Also includes two front sections and...
| MESSERSCHMITT BF 109T Details: | |
| Type: | Airplane |
| Class: | Radio-Control |
| Use: | Fighter |
| Motor: | Electric-Powered |
| Wingspan: | 38.6 in. / 98 cm |
| Publisher: | 3DLabPrint |
| Designer: | 3dLabPrint |
| Date: | 09/2016 |
| Plan File Info: | |
| ID: | 99289 |
| File Size: | 351.1 KB |
| Downloads: | 1300 |
| Listing Editor: | 3dlabprint |
| Added: | 18/04/2017 13:00 |
| Updated: | 04/06/18 02:43:37pm |
The EasyMax is an easy to fly and easy to assemble "warm liner". You will need 3 servos, one for each half wing and one for the elevator and a 10mm carbon fibre tube, around 46cm...
| EasyMax Details: | |
| Type: | Glider |
| Class: | Radio-Control |
| Use: | Sport |
| Motor: | Electric-Powered |
| Wingspan: | 59.8 in. / 152 cm |
| Publisher: | 3DLabPrint |
| Designer: | 3dlabprint |
| Date: | 05/2016 |
| Plan File Info: | |
| ID: | 99502 |
| File Size: | 396.0 KB |
| Downloads: | 1505 |
| Listing Editor: | 3dlabprint |
| Added: | 13/07/2017 13:54 |
| Updated: | 04/06/18 02:42:52pm |
3D Printed kits are a great way to start in this wonderful world of R/C Model Airplanes, we have more than 40 kits available that can be printed on PLA or PET-G both materials are great choices for these models.
If you are curious about these kits why not starting by a small one?
