Order your Thermaleer prints today!
The Thermaleer plan can be printed on plain paper, tracing paper or polyester film and shipped worldwide.
This calculator will work on pdf and image format files, if the file is very large, 5 or even 10 Mb it will take longer to process the plan file, it may finish even after the button animation stops spinning, please be patient when calculating larger files.
This tool allows you to calculate the cost of printing and shipping the Thermaleer plans and its building article if available.
How to use
- Set the options on the left and click the Calculate button
- Change the options to match your needs, Polyester plans must me shipped rolled.
- When you're happy with the results click the Paypal Button and finish the checkout.
- I will review the order, print and ship within one business day.
- Make sure your Paypal address it´s correct.
- Make sure your Paypal email address it´s active, I will use it to communicate with you about the order and shipping. Or send me a message from the contact page so I can have your email address.
Download before ordering!
Download and inspect the plan pdf file before ordering any prints, the paper prints will be made from it.
You can use Adobe PDF Reader to open any PDF file, set the zoom to 100% and look at the line quality, use the tape measure tool to check the dimensions. This is your responsibility.
Terms of Service.
What are you ordering:
You are ordering a print from the main PDF file in this listing
, it´s exactly like taking this file in a thumb drive to a local print shop and ask them to make a print.
About the plan source:
You should verify if the source file has the quality for the type of construction you intend to do
, we will print the file without any kind of enhancement or scaling
To know if the file is good please download it and open it on a pdf viewer like Adobe pdf viewer
and set the view level or zoom level to 100% or 1:1 or
full scale or actual size, depending on which version or pdf viewer you are using. Also, using the measuring tool
make sure all the parts fit together and have the correct size.
In doubt please ask us
for an opinion.
We can scale this plan for you. But please keep in mind that if this plan is not vector, if you enlarge it too much the quality will be degraded.
You will receive:
- Laser Printed plan on good quality Bond paper or/and Tracing Paper and/or Polyester sheet of the PDF file from this listing, depending on what you have purchased.
- Rolled sheets, up to 5 in the same cardboard tube.
- Envelope, up to 5 sheets per envelope.
- Articles and Instructions if they are available and if you order them.
- Air Mail, Priority, Priority Insured or Normal mail, according to your choice.
About our printers:
We use professional quality laser OCÉ and Canon printers/copiers
, these printers use toner
, not ink so the printings will be durable and waterproof
About the different media types:
White Bond paper, 80 grams per square meter.
Bond Tracing paper:
Bond Tracing paper, 90 grams per square meter.
High quality polyester sheet incredibly durable, will resist cuts and glue and can be washed (I use it as sail material on my RC sailboats).
We charge by print length (914mm or 91,4cm or 36in. by the length of the print)
This means that a plan 120cm by 150cm will be charged two times 150cm because it will be printed in two tiles, a plan 91cm by 150cm will be charged one time its length or 150cm and a plan 91cm by 40cm will be charged 40cm.
The system will try to fit a plan in the 91,4cm of the printer width in order to reduce the costs or print length to the maximum. This is the same charging method used in any printshop.
We will use paper or waxed paper padded envelopes for folded plans and hard cardboard tubes with plastic ends for rolled plans, depending on your choice.
We ship from Portugal, Europe and use the reliable Portuguese mail system CTT.
CTT has delivery agreements with different entities on each country so if you´re from the US you may have your order delivered by USPS, in the UK may be Royal Mail and so on.
Orders are dispatched on the next or second business day after purchase.
We charge according to the ctt.pt postage table.
Normal Mail is non traceable, use at your own risk, no insurance, total loss if the carrier loses it.
Priority Mail is traceable on your local/national mail system, it is not insured.
Priority Insured Mail is traceable on your local/national mail system and is insured.
If you ordered Priority or Insured your order will have a Tracking Code, to get it please reply to the Paypal notification email and we´ll reply back with your tracking code that you can paste on the website under the top menu "More".
Discount coupons are valid from 3 to 30 days after purchase, you can use them any number of times you like but only once per item order.
The codes are issued in the Paypal invoice, please check the transaction details at Paypal website or in the Paypal email you received after purchase to get your Discount Coupon code.
You are free to post the Coupons online, give them to friends, share them in any way you like.
To use just Copy/Paste the Coupon code (i.e.: TAKE10#6012019) to the text field in the plan listing page to use your discount. No spaces and no manual typing, just copy/paste.
Please keep in mind that when you order a plan it will be printed specifically for you, just like when you go to a local print shop.
Before ordering please make sure that the plan will fit your needs, in doubt please ask us for an opinion.
If you still receive a plan you don´t like we can accept it back if it is in good conditions but we will not refund the postage from the initial order, you will have
to pay the postage to return the plan to us and a 30% re-stock fee will be applied so please, in doubt, please ask us
for an opinion.
Orders can be paid with Paypal
or Credit Card
via Paypal and are shipped to the address on your Paypal account or to the address you set at checkout.
About the Calculator:
The Plans Price Calculator will read the plan file and output all the information on the panel to the right according to the selected options, you can change the options and request a new quote at any time.
If you would like to print a plan that is not on the website you can upload it to the main plans category in pdf format, multiple sheets in the same pdf file, and use the Plans Price Calculator to get a quote and place the order.
3D Printed Parts
Order 3D Printed Parts for the Thermaleer
3D printing allow us to design not only complete airplane models but also parts to complete balsa, foam or even composite model airplanes.
Parts can be designed and printed to fit exactly a model you have or a model you plan to build, even if you are not building this model to the full size plan.
3D Printing, and 3D CAD allow us to create the actual parts to fit on our models but also allow us to create negative molds where we can make composite parts.
I´m adding this service to all the plan listings on the site knowing that not every part you imagine or need can be done, knowing this, jobs will be evaluated case by case and a price estimate will be given on request.
What can be done with 3D Printing:
- Wheel Pants
- Landing Gears
- Wing Ribs
- Motor Mounts
- Servo Trays
- Servo Covers
- Complete Models
Full Models, Wings or Fuselages
It is possible to design a complete model for you but keep in mind that this is a lengthy process, many hours are needed to design and test a fully 3D Printed model. The finished model cannot have the same internal structure of the wooden made counterpart because it wouldn´t be possible to print it, it would have to have a structure like the models you can see in the 3D Printed Kits section of the site.
From the outside they are very loyal to the plan but still they have to be printed in sections, typically to fit a 250X210X200 mm cube that is the printer maximum build volume.
3D Printed planes are also heavier than light balsa models, all built up and ready to fly, with an electric power system they are generally a little lighter than the same model if it were powered by a glow engine. Please have a look at the 3D Printed kits section to have an idea on this.
I will calculate a price upon request, please contact me here mentioning this PlanID: 102148 and the job you wish me to do.
Comments & Corrections
Do you have questions, comments or corrections about the Thermaleer? Your input will surely help others to build this model...