Home PDF Bitmap Wood Plans from Magazines FMT Bellanca 1912

Bellanca 1912 ( 78 in. / 198 cm )


Plan listing thumbnail Next Plan
This is the Bellanca 1912 listing page, here you can download the plan, article and see the main thumbnail and extra images.

Bellanca 1912 model airplane plan

Bellanca 1912

FMT's Bellanca 1912

Giuseppe Bellanca baute sein erstes Flugzeug im Jahr 1912. Es widersprach den
populären Entwürfen der damaligen Zeit, da sein Motor vorne und sein Leitwerk
hinten war! Und obwohl dies heute die Norm ist, fragten sich die Leute damals,
ob es fliegen würde. Bellanca sagte: "Die Experten gaben mir 15 Tage zu leben.
Aber das war hoffnungsvoll, denn es gab mir den Eindruck, dass sie dachten, die
Maschine könnte vom Boden abheben."
Bellanca
Dieser Oldtimer ist nicht nur für Experten bestimmt ,sondern ebenso gut für solche Modellflieger
geeignet ,die weniger geübt im Bauen und Fliegen sind .
Damit möchte ich zahlreichen Modellfliegern ermöglichen ,einen Oldtimer zu bauen ,der attraktiv
und interessant ist und der noch ohne große Kosten und Bauaufwand anzufertigen ist .
Das Modell hat eine Spannweite von 2300 mm und eine Gesamtlänge 1800 mm . Es ist mit
Seiten ,Höhen und Querrudern ausgestattet und damit genau wie sein Vorbild ausgerüstet .
Als Profil wurde das bekannte Clark Y gewählt .
Die Flügeltiefe beträgt 420 mm .
Die Fernsteueranlage findet im Mittelstück der Tragflächen genügend Platz .Die beiden
Tragflügelhälften können zum Transport vom Mittelstück getrennt werden .
Modell :
Begonnen wird mit der Kufe .Dazu habe ich ein etwas schweres Eschenholz verwendet ,da ich das
Gewicht später sicher für den Schwerpunkt brauchen werde . 4 Stück zu je 3 mm sollten genügen.
Der Rumpf beträgt später auch 12 mm ! Man könnte auch eine Schablone Fertigen und mit
Schraubzwingen befestigen , aber so geht es schneller .
Der Rumpfaufbau ist sehr einfach gehalten , ich verwende 12 x 12 Kieferleisten .
Für die Qerstreben 12 x 6 mm Balsa Leisten .Bei Oldtimer Flugmodellen sollte man den
Heckberreich so leicht wie möglich Bauen . Der Schwerpunkt wird es uns Danken !
Das Fahrwerk besteht aus 12 mm Kieferrundstäben. Ein passendes Hartes Alurohr wird am
Schraubstock einfach gequetscht und gebogen .Wenn das Fahrwerk an dem Rumpf angepasst wurde
werden sie mit Uhu Endfest eingeklebt .Danach alles Sauber verschleifen Grundieren und mit
einem Schwarzen Lack Lackieren .
Das Heckfahrwerk würde laut Bauplan aus einem Rad bestehen ,was mir aber aber bei diesem Oldie
Modell nicht gefällt .
Also habe ich aus 10 Stück 0,8 mm Sperrholzstreifen einen S------------ ,mit Hilfe einer Nagelschablone
Hergestellt ! Gefedert wird das ganze mit einem ausgedienten Farrad Schlauch .
Das Höhenleitwerk muss sehr leicht gebaut werden ,die Hebelwirkung für den angegeben
Schwerpunkt ist sehr gering . Ich hab 6 mm ausgesuchtes Balsa verwendet ,selbe betrifft auch das
Seitenleitwerk
Als Motor kommt bei meiner Bellanca ein ZG 20 zum Einsatz finde das der Perfekt zu dem Modell
passt .Ein Motorsturz von 5 Grad sollte eingehalten werden ,Seitensturz hab ich 1 Grad gewählt !
Den Motorträger hab ich aus 25 mm Hartholz erstellt zusätzlich wird der Spant noch von 4
Messingrohren von 6 mm gehalten !
Zum Flügelbau gibt es eigentlich nicht viel zu schreiben , Ich verwende Balsaholme 8 x 8 mm mit
beidseitiger Verkastung , Rippen wurden in einem Blockverband erstellt ,Rippenstärke 3 mm . Die
ersten 3 Rippen bestehen aus 4 mm Pappelsperrholz ! Das Modell besitzt kein Steckungsrohr !
Für die Bespannenden Teile verwende ich Oratex Lackiergewebefolie . Aus den Reststücker
schneide ich mit einer Zackenschere die Zackenbänder . Ich weiß das es zu dieser Zeit noch keine
Zackenbänder gab , aber das macht auch nichts ,weil ich nur Semi Scale Modelle Baue !
Aufwendig Lackieren war Gestern , ich hab einfach mit einem schwamm eine Clou Holzbeize
aufgetragen ! Geringer Verbrauch 250 ml und mit zehn Euro echt eine tolle sache !
Der RC einbau verschwindet komplett im Flügelmittelteil ,Platz ist genügend vorhanden .
Keine scheu so ein Wunderschönes Scale Modell zu Bauen .

Link to this page: https://aerofred.com/details.php?image_id=104192

Details: Full Details
ID: 104192
File Size: 10.0 MB
Type: Airplane
Class: Radio-Control
Use: Xperimental
Scale:  (1:5)
Motor: Glow-Powered
Motor Size:0.60-To-0.90-CI 
Wingspan: 78 in. / 198 cm
Publisher: FMT
Magazines:  More at RCBookcase
Designer: Willy Bender
Date: 05/1980
Material:Various-Wood-Types
Listing Editor: sound1971
Added: 28/04/2023 17:34
Updated: 10/06/23 07:29:08am
Corrections? Contact sound1971
Need Help? Forum
Filetype: .pdfSoftware for .pdf files

Downloads
Download Main Plan file, possible versions and from alternative sources if available.

 Download Plan Order Printed Copy

Plan details Next Plan
These are the details for the "Bellanca 1912" plan. If you would like to become a plan editor and help us to edit the attributes of all the plans in the website please click the "Edit Attributes" button below.

Plan Attributes: Edit Attributes
Plan ID:104192
Class:Radio-Control
Model Type:Airplane
Channels:6-ch
Functions:Ailerons-Elevator-Rudder-Throttle
Aircraft Use:Xperimental
Wingspan: 78 in. / 198 cm
Wingspan Class:160cm-To-200cm (63in-To-79in)
Landing Gear:None
Motor Type:Glow-Powered
Motor Size:0.60-To-0.90-CI 
Number of Motors:1-Tractor
Material:Various-Wood-Types
Construction Skills:Beginner
Pilot Skills:Beginner
Publisher:FMT
Magazines:  More at RCBookcase
Date:05/1980
Designer:Willy Bender
Restorer:Have you restored this Plan? Request transfer to your account
First Scan:Werner Forster
Category:FMT
Similar:Plans like Bellanca 1912
File Details:
Date:28/04/2023 17:34
Views:17145
Downloads:575
Rating:5.00(2Votes)
File size:10.0 MB
File Details:
Date:28/04/2023 17:34
Views:17145
Downloads:575
Rating:5.00(2Votes)
File size:10.0 MB

Thinking about this one? Next Plan
If you know about a building log for this plane please post a comment, we will add it to the listing here.

Order your Bellanca 1912 prints today!
The Bellanca 1912 plan can be printed on plain paper, tracing paper or polyester film and shipped worldwide.

Plans Service Calculator
Region:
Media:
Scale: The stated wingspan for this model is 78 in. / 198 cm. Please Change the values below to order in a different wingspan.

Warning:
1. Scaling up a plan too much will degrade the line quality.
2. Please make sure the stated wingspan is correct.
Packaging:
Mail:
Discount Coupon:

Hollydays:

We will be out from 10th of December to 17th of December..
All orders are welcome and we will be responding to emails but orders placed during this period will only be processed and shipped after we return.

This calculator will work on pdf and image format files, if the file is very large, 5 or even 10 Mb it will take longer to process the plan file, it may finish even after the button animation stops spinning, please be patient when calculating larger files.

Ordering Prints
This tool allows you to calculate the cost of printing and shipping the Bellanca 1912 plans and its building article if available and selected.

How to use
  1. Set the options on the left and click the Calculate button
  2. Change the options to match your needs, Polyester plans must me shipped rolled.
  3. When you're happy with the results click the Paypal Button and finish the checkout.
  4. We will review the order, print and ship within one business day.

Terms of Service.
Please read the Plans Printing Service Terms of Use before placing an order.

What are you ordering:

You are ordering a print from the main PDF file in this listing, it´s exactly like taking this file in a thumb drive to a local print shop and ask them to make a print.

About the plan source:

You should verify if the source file has the quality for the type of construction you intend to do, we will print the file without any kind of enhancement or scaling. To know if the file is good please download it and open it on a pdf viewer like Adobe pdf viewer and set the view level or zoom level to 100% or 1:1 or full scale or actual size, depending on which version or pdf viewer you are using. Also, using the measuring tool make sure all the parts fit together and have the correct size.
In doubt please ask us for an opinion.

Plans Scaling:

We can scale this plan for you. But please keep in mind that if this plan is not vector, if you enlarge it too much the quality will be degraded.

You will receive:

  • Laser Printed plan on good quality Bond paper or/and Tracing Paper and/or Polyester sheet of the PDF file from this listing, depending on what you have purchased.
  • Rolled sheets, up to 5 in the same cardboard tube.
  • Envelope, up to 5 sheets per envelope.
  • Articles and Instructions if they are available and if you order them.
  • Air Mail, Priority, Priority Insured or Normal mail, according to your choice.

About our printers:

We use professional quality laser OCÉ and Canon printers/copiers, these printers use toner, not ink so the printings will be durable and waterproof.

About the different media types:

Bond Paper: White Bond paper, 80 grams per square meter.
Bond Tracing paper: Bond Tracing paper, 90 grams per square meter.
Polyester film: High quality polyester sheet incredibly durable, will resist cuts and glue and can be washed (I use it as sail material on my RC sailboats).

Pricing:

We charge by print length (914mm or 91,4cm or 36in. by the length of the print)
This means that a plan 120cm by 150cm will be charged two times 150cm because it will be printed in two tiles, a plan 91cm by 150cm will be charged one time its length or 150cm and a plan 91cm by 40cm will be charged 40cm.
The system will try to fit a plan in the 91,4cm of the printer width in order to reduce the costs or print length to the maximum. This is the same charging method used in any printshop.

Packaging:

We will use paper or waxed paper padded envelopes for folded plans and hard cardboard tubes with plastic ends for rolled plans, depending on your choice.

Shipping:

We ship from Portugal, Europe and use the reliable Portuguese mail system CTT.
CTT has delivery agreements with different entities on each country so if you´re from the US you may have your order delivered by USPS, in the UK may be Royal Mail and so on.
Orders are dispatched on the next or second business day after purchase.

Postage:

We charge according to the ctt.pt postage table.

Mailing Methods:

Normal Mail: Normal Mail is non traceable, use at your own risk, no insurance, total loss if the carrier loses it.
Priority: Priority Mail is traceable on your local/national mail system, it is not insured.
Priority Insured: Priority Insured Mail is traceable on your local/national mail system and is insured.

Tracking Code:

If you ordered Priority or Insured your order will have a Tracking Code, to get it please reply to the Paypal notification email and we´ll reply back with your tracking code that you can paste on the website under the top menu "More".

Discount Coupons:

Discount coupons are valid from 3 to 30 days after purchase, you can use them any number of times you like but only once per item order.
The codes are issued in the Paypal invoice, please check the transaction details at Paypal website or in the Paypal email you received after purchase to get your Discount Coupon code.
You are free to post the Coupons online, give them to friends, share them in any way you like.
To use just Copy/Paste the Coupon code (i.e.: TAKE10#6012019) to the text field in the plan listing page to use your discount. No spaces and no manual typing, just copy/paste.

Returns:

Please keep in mind that when you order a plan it will be printed specifically for you, just like when you go to a local print shop.
Before ordering please make sure that the plan will fit your needs, in doubt please ask us for an opinion. If you still receive a plan you don´t like we can accept it back if it is in good conditions but we will not refund the postage from the initial order, you will have to pay the postage to return the plan to us and a 30% re-stock fee will be applied so please, in doubt, please ask us for an opinion.

Payments:

Orders can be paid with Paypal or Credit Card via Paypal and are shipped to the address on your Paypal account or to the address you set at checkout.

About the Calculator:

The Plans Price Calculator will read the plan file and output all the information on the panel to the right according to the selected options, you can change the options and request a new quote at any time.
If you would like to print a plan that is not on the website you can upload it to the main plans category in pdf format, multiple sheets in the same pdf file, and use the Plans Price Calculator to get a quote and place the order.

3D Printed Parts
Order 3D Printed Parts for the Bellanca 1912

General Information

3D printing allow us to design not only complete airplane models but also parts to complete balsa, foam or even composite model airplanes.

Parts can be designed and printed to fit exactly a model you have or a model you plan to build, even if you are not building this model to the full size plan.

3D Printing, and 3D CAD allow us to create the actual parts to fit on our models but also allow us to create negative molds where we can make composite parts.

I´m adding this service to all the plan listings on the site knowing that not every part you imagine or need can be done, knowing this, jobs will be evaluated case by case and a price estimate will be given on request.

What can be done with 3D Printing:

  • Canopies
  • Cowls
  • Wheel Pants
  • Landing Gears
  • Wing Ribs
  • Motor Mounts
  • Servo Trays
  • Servo Covers
  • Wings
  • Fuselages
  • Complete Models

Full Models, Wings or Fuselages

It is possible to design a complete model for you but keep in mind that this is a lengthy process, many hours are needed to design and test a fully 3D Printed model. The finished model cannot have the same internal structure of the wooden made counterpart because it wouldn´t be possible to print it, it would have to have a structure like the models you can see in the 3D Printed Kits section of the site.

From the outside they are very loyal to the plan but still they have to be printed in sections, typically to fit a 250X210X200 mm cube that is the printer maximum build volume.

3D Printed planes are also heavier than light balsa models, all built up and ready to fly, with an electric power system they are generally a little lighter than the same model if it were powered by a glow engine. Please have a look at the 3D Printed kits section to have an idea on this.

Pricing

I will calculate a price upon request, please contact me here mentioning this PlanID: 104192 and the job you wish me to do.

Comments & Corrections
Do you have questions, comments or corrections about the Bellanca 1912? Your input will surely help others to build this model...

Related Plans
Plans related to the main plan in this listing page.

NameSpanClassTypeUsePowerPublisherDesignerDate
Bellanca
ID:79750 | 789.7 KB
33.1 in. / 84 cm Control-Line Airplane Sport Glow-Powered --- --- ---
Bellanca
ID:102183 | 285.6 KB
22 in. / 55.9 cm Free-Flight Airplane Sport Rubber-Band-Powered Model Airplane News Unknown 09/1930
Bellanca
ID:103849 | 220.7 KB
38 in. / 96.5 cm Free-Flight Airplane Sport Rubber-Band-Powered Air Trails Cristo Russo 01/1951
Bellanca 28-92 Trimotor
ID:79752 | 3.1 MB
56 in. / 142.2 cm Radio-Control Airplane Racing Electric-Powered RC Modeller Laddie Mikulasko ---
Bellanca 28-92 Trimotor
ID:92802 | 3.1 MB
56 in. / 142.2 cm Radio-Control Airplane Civilian Electric-Powered RCModeler Laddie Mikulasko 01/1997
Bellanca Airbus
ID:102208 | 250.8 KB
28 in. / 71.1 cm Free-Flight Airplane Sport Rubber-Band-Powered Model Airplane News R.C Morrison 11/1931
Bellanca Aircruiser
ID:79753 | 1.6 MB
30 in. / 76.2 cm Free-Flight Airplane Civilian Rubber-Band-Powered Model Airplane News Joseph Kovel 07/1937
Bellanca Aircruiser
ID:102166 | 253.3 KB
34 in. / 86.4 cm Free-Flight Airplane Sport Rubber-Band-Powered Model Builder Joseph Kovel 04/1983
Bellanca Aries
ID:79754 | 272.0 KB
13 in. / 33 cm Free-Flight Airplane Civilian Rubber-Band-Powered --- --- ---
Bellanca Aries T-250
ID:101674 | 111.1 KB
13 in. / 33 cm Free-Flight Airplane Civilian Rubber-Band-Powered Model Builder Walt Mooney 07/1979
Bellanca C-27A Aircruiser
ID:94394 | 2.3 MB
20 in. / 50.8 cm Free-Flight Airplane Cargo Rubber-Band-Powered --- --- ---
Bellanca C-27A-Modelcraft
ID:79755 | 2.4 MB
48.8 in. / 124 cm Free-Flight Airplane Civilian Rubber-Band-Powered --- --- ---
Bellanca CF
ID:95669 | 393.1 KB
Less-Than-50cm (20in) Free-Flight Airplane Civilian Rubber-Band-Powered --- --- ---
Bellanca CH-400 Columbia
ID:95670 | 1.1 MB
Less-Than-50cm (20in) Static-Model Airplane Civilian Not-Powered --- --- ---
Bellanca CH-400 Skyrocket
ID:94334 | 3.0 MB
35 in. / 88.9 cm Free-Flight Airplane Civilian Rubber-Band-Powered Flying Scale Inc. Bill Galloway 01/1991
Bellanca Citabria 7ECA
ID:95741 | 832.0 KB
--- --- Airplane Civilian --- Modelar --- 07/1983
Bellanca Cruisemaster
ID:103667 | 723.9 KB
40 in. / 101.6 cm Free-Flight Airplane Sport Diesel-Powered Model Aircraft Geoffrey Gannon 04/1955
Bellanca Cruisemaster Whitman
ID:97756 | 806.6 KB
18.1 in. / 46 cm Free-Flight Airplane Civilian Rubber-Band-Powered Whitman Publishing Co --- 01/1950
Bellanca Decathlon 40
ID:94333 | 3.6 MB
67.3 in. / 171 cm Radio-Control Airplane Civilian Glow-Powered --- --- ---
Bellanca Decathlon 40
ID:103994 | 6.0 MB
68 in. / 172.7 cm Radio-Control Airplane Sport Glow-Powered OK Pilot Co Model --- ---

Vintage Magazines
Hlsat makes this great website with contributions from around the world.
Unique Static Models
Albert from Catalonia produces these unique static models.
Wing Design App
Wing Design Software for RC models.

3D Printed Kits
High Quality 3D Printed Kits in PLA, PET-G and ABS.

EGW-80
31.5in./80cm Span

EGW-80 model airplane plan
Printed Kit in high quality PLA or PET.
Shipped in 3-4 business days. (PLA)

MESSERSCHMITT BF 109 F or H
35in./89cm Span

MESSERSCHMITT BF 109 F or H model airplane plan
Printed Kit in high quality PLA or PET.
Shipped in 2-3 business days. (PLA)

VOUGHT F4U CORSAIR 1/12 SCALE
39.4in./100cm Span

VOUGHT F4U CORSAIR 1/12 SCALE model airplane plan
Printed Kit in high quality PLA or PET.
Shipped in 3-4 business days. (PLA)

Free Plans
Download Free Model Plans.

Amadeus
Radio-Control / Sport / 77.2 in. / 196 cm Span
Amadeus model airplane plan
 746
Radio-Control
Glider
Electric-Powered
Elspmo
Radio-Control / Sport / 51.2 in. / 130 cm Span
Elspmo model airplane plan
 181
Radio-Control
Airplane
Electric-Powered
Dewoitine D-520
Control-Line / Fighter / 37 in. / 94 cm Span
Dewoitine D-520 model airplane plan
 483
Control-Line
Airplane
Glow-Powered
Junkers Ju 290
Radio-Control / Bomber / 116.1 in. / 295 cm Span
Junkers Ju 290 model airplane plan
 641
Radio-Control
Airplane
Glow-Powered
Papageier
Radio-Control / Sport / 63 in. / 160 cm Span
Papageier model airplane plan
 501
Radio-Control
Glider
Share Your Plans With Us

AeroFred.com is a Plans Sharing Community, not just a website to grab some plans.

Every day thousands of modelers visit us and download free model airplane and boat plans, plans shared by other modelers...

If you have plans that are not here please upload them, so others can build from them.


Upload a Plan

Please login first

Details | Gallery | Prints