Home PDF Bitmap Wood Model Airplane Plans (1) PDF Bitmap Wood Model Airplane Plans (2) Douglas SBD Dauntless

Douglas SBD Dauntless ( 31 in. / 78.7 cm )


Plan listing thumbnail Prev Next Plan
This is the Douglas SBD Dauntless listing page, here you can download the plan, article and see the main thumbnail and extra images.

Douglas SBD Dauntless model airplane plan

Douglas SBD Dauntless

Berkeley Models, Inc's Douglas SBD Dauntless

The Douglas SBD Dauntless was a World War II American naval scout plane and dive bomber that was manufactured by Douglas Aircraft from 1940 through 1944. The SBD ("Scout Bomber Douglas") was the United States Navy's main carrier-borne scout plane and dive bomber from mid-1940 through mid-1944. The SBD was also flown by the United States Marine Corps, both from land air bases and aircraft carriers. The SBD is best remembered as the bomber that delivered the fatal blows to the Japanese carriers at the Battle of Midway in June 1942.

The most important thing to keep in mind about this plan is that it's from a 1957 Berkeley kit that provided a "fully carved four-piece fuselage". There are drawings of the fuselage cross-section for the experienced model builder to construct a built-up fuselage. It can be done. The wings, too, have no rib diagrams drawn on the plans but as in the fuselage and experienced model builder could rough out and wing ribs and make a fully functional model airplane out of these plans.

One of the things that intrigued me about these plans forced the abundant wire bending to actuate the split dive breaks used in the SBD dauntless. Actuating the Fowler flap are drop-down flap alone is not a terribly daunting task. However, the split flaps where the flaps work independently are together i.e. the flaps can act as a "normal flap" in that the bottom half drops in the top does not deploy. In a dive bombing situation extend i.e. the top flap goes up the bottom flap goes down and back to his air brakes so that when the airplane is in a vertical dive it doesn't exceed maximum airspeed for the pullout. I would build this model from these plans.

Link to this page: https://aerofred.com/details.php?image_id=80812

Sources: https://en.wikipedia.org/wiki/Douglas_SBD_Dauntless
Details: Full Details
ID: 80812
File Size: 2.5 MB
Type: Airplane
Class: Control-Line
Use: Bomber
Motor: Glow-Powered
Motor Size:0.20-To-0.35-CI (2-strokes)
Wingspan: 31 in. / 78.7 cm
Publisher: Berkeley Models, Inc
Magazines:  More at RCBookcase
Pub. Ref: SBD
Designer: Paul Delgatto
Date: 01/1957
Weight:500 g
Material:Various-Wood-Types
Listing Editor: Dad3353
Added: 26/03/2015 16:05
Updated: 10/12/17 01:14:45am
Corrections? Contact Dad3353
Need Help? Forum
Filetype: .pdfSoftware for .pdf files

Member Profile for Dad3353

Recently retired IT Jack of all trades.

First build: Keil Kraft rubber-motor SE5a, aged about 10
First radio system: One-button MacGregor 'Escapement' system
Lapsed (work, family, life etc...)
Received Goldberg Electra as 40th birthday present from family.
Just finished Electra build (nearly 30 years build time..!)
Bought s/h Scorpio Basic 2000
Joined local Model Club to learn how to fly them..!
Radio system: s/h Turnigy 9x

Downloads
Download Main Plan file, possible versions and from alternative sources if available.

 Download Article Order Prints


Video
Videos for the Douglas SBD Dauntless.

Plan details Prev Next Plan
These are the details for the "Douglas SBD Dauntless" plan. If you would like to become a plan editor and help us to edit the attributes of all the plans in the website please click the "Edit Attributes" button below.

Plan Attributes: Edit Attributes
Plan ID:80812
Keywords:SBD Dauntless dive bomber World War II Battle of Midway control line Berkeley scale Paul Delgatto 1957
Class:Control-Line
Model Type:Airplane
Aircraft Use:Bomber
Wingspan: 31 in. / 78.7 cm
Wingspan Class:75cm-To-100cm (30in-To-40in)
Wing Position:Low-Mounted-Wing
Wing Style:Straight-Wing-Rect
Wing Dihedral:Dihedral
Landing Gear:Taildragger
Motor Type:Glow-Powered
Motor Size:0.20-To-0.35-CI (2-strokes)
Number of Motors:1-Tractor
Weight:500 g
Weight Class:300g-To-500g (10.5oz-To-17.6oz)
Material:Various-Wood-Types
Construction Skills:High-Intermediate
Pilot Skills:Low-Intermediate
Publisher:Berkeley Models, Inc
Magazines:  More at RCBookcase
Date:01/1957
Reference:SBD
Designer:Paul Delgatto
Restorer:Have you restored this Plan? Request transfer to your account
Category:PDF Bitmap Wood Model Airplane Plans (2)
Similar:Plans like Douglas SBD Dauntless
File Details:
Date:26/03/2015 16:05
Views:4520
Downloads:459
Rating:4.75(4Votes)
File size:2.5 MB

Thinking about this one? Prev Next Plan
If you know about a building log for this plane please post a comment, we will add it to the listing here.

Order your Douglas SBD Dauntless prints today!
The Douglas SBD Dauntless plan can be printed on plain paper, tracing paper or polyester film and shipped worldwide.

Plans Service Calculator
Region:
Media:
Scale: The original wingspan for this model is 31 in. / 78.7 cm. Please Change the values below to order in a different wingspan.

Warning:
1. Scaling up a plan too much will degrade the line quality.
2. Please make sure the stated wingspan is correct.
Article:
Packaging:
Mail:
Discount Coupon:

This calculator will work on pdf and image format files, if the file is very large, 5 or even 10 Mb it will take longer to process the plan file, it may finish even after the button animation stops spinning, please be patient when calculating larger files.

If second plan and up choose "2nd & Up" in the packaging option.

Ordering Prints
This tool allows you to calculate the cost of printing and shipping the Douglas SBD Dauntless plans and its building article if available.

How to use
  1. Set the options on the left and click the Calculate button
  2. Change the options to match your needs, Polyester plans must me shipped rolled.
  3. When you're happy with the results click the Paypal Button and finish the checkout.
  4. I will review the order, print and ship within one business day.
Important!
  1. Make sure your Paypal address it´s correct.
  2. Make sure your Paypal email address it´s active, I will use it to communicate with you about the order and shipping. Or send me a message from the contact page so I can have your email address.
  3. Download and inspect the plan pdf file, the paper prints will be made from it.
Ordering several plans
  1. If one of the plans is Tracing paper or Polyester, select Cardboard Tube and all the other options and click "Add To Cart"
  2. Select "2nd & Up" as packaging
  3. Only need to add Tracking once.
  4. If there is any overcharge we will issue a refund after shipping via Paypal.
Requesting a Resized Plan
  1. If you need to resize a plan please contact us with the ID:80812 and the desired wingspan.
  2. We will send you a resized pdf for evaluation and upload the new file to the site so you can place the order.
Printing plans that are not on the site
  1. The best option is to get the plan pdf file, upload it here as a new listing and then use the calculator in it´s page..

Terms of Service.
Please read the Plans Printing Service Terms of Use before placing an order.

What are you ordering:

You are ordering a print from the main PDF file in this listing, it´s exactly like taking this file in a thumb drive to a local print shop and ask them to make a print.

About the plan source:

You should verify if the source file has the quality for the type of construction you intend to do, we will print the file without any kind of enhancement or scaling. To know if the file is good please download it and open it on a pdf viewer like Adobe pdf viewer and set the view level or zoom level to 100% or 1:1 or full scale or actual size, depending on which version or pdf viewer you are using. Also, using the measuring tool make sure all the parts fit together and have the correct size.
In doubt please ask us for an opinion.

Plans Scaling:

We can scale this plan for you. But please keep in mind that if this plan is not vector, if you enlarge it too much the quality will be degraded.

You will receive:

  • Laser Printed plan on good quality Bond paper or/and Tracing Paper and/or Polyester sheet of the PDF file from this listing, depending on what you have purchased.
  • Rolled sheets, up to 5 in the same cardboard tube.
  • Envelope, up to 5 sheets per envelope.
  • Articles and Instructions if they are available and if you order them.
  • Air Mail, Priority, Priority Insured or Normal mail, according to your choice.

About our printers:

We use professional quality laser OCÉ and Canon printers/copiers, these printers use toner, not ink so the printings will be durable and waterproof.

About the different media types:

Bond Paper: White Bond paper, 80 grams per square meter.
Bond Tracing paper: Bond Tracing paper, 90 grams per square meter.
Polyester film: High quality polyester sheet incredibly durable, will resist cuts and glue and can be washed (I use it as sail material on my RC sailboats).

Pricing:

We charge by print length (914mm or 91,4cm or 36in. by the length of the print)
This means that a plan 120cm by 150cm will be charged two times 150cm because it will be printed in two tiles, a plan 91cm by 150cm will be charged one time its length or 150cm and a plan 91cm by 40cm will be charged 40cm.
The system will try to fit a plan in the 91,4cm of the printer width in order to reduce the costs or print length to the maximum. This is the same charging method used in any printshop.

Packaging:

We will use paper or waxed paper padded envelopes for folded plans and hard cardboard tubes with plastic ends for rolled plans, depending on your choice.

Shipping:

We ship from Portugal, Europe and use the reliable Portuguese mail system CTT.
CTT has delivery agreements with different entities on each country so if you´re from the US you may have your order delivered by USPS, in the UK may be Royal Mail and so on.
Orders are dispatched on the next or second business day after purchase.

Discount Coupons:

Discount coupons are valid from 3 to 30 days after purchase, you can use them any number of times you like but only once per item order.
The codes are issued in the Paypal invoice, please check the transaction details at Paypal website or in the Paypal email you received after purchase to get your Discount Coupon code.
You are free to post the Coupons online, give them to friends, share them in any way you like.
To use just Copy/Paste the Coupon code (i.e.: TAKE10#6012019) to the text field in the plan listing page to use your discount. No spaces and no manual typing, just copy/paste.

Postage:

We charge according to the ctt.pt postage table.

Mailing Methods:

Normal Mail: Normal Mail is non traceable, use at your own risk, no insurance, total loss if the carrier loses it.
Priority: Priority Mail is traceable on your local/national mail system, it is not insured.
Priority Insured: Priority Insured Mail is traceable on your local/national mail system and is insured.

Returns:

Please keep in mind that when you order a plan it will be printed specifically for you, just like when you go to a local print shop.
Before ordering please make sure that the plan will fit your needs, in doubt please ask us for an opinion. If you still receive a plan you don´t like we can accept it back if it is in good conditions but we will not refund the postage from the initial order, you will have to pay the postage to return the plan to us and a 30% re-stock fee will be applied so please, in doubt, please ask us for an opinion.

Payments:

Orders can be paid with Paypal or Credit Card via Paypal and are shipped to the address on your Paypal account or to the address you set at checkout.

About the Calculator:

The Plans Price Calculator will read the plan file and output all the information on the panel to the right according to the selected options, you can change the options and request a new quote at any time.
If you would like to print a plan that is not on the website you can upload it to the main plans category in pdf format, multiple sheets in the same pdf file, and use the Plans Price Calculator to get a quote and place the order.

3D Printed Parts
Order 3D Printed Parts for the Douglas SBD Dauntless

General Information

3D printing allow us to design not only complete airplane models but also parts to complete balsa, foam or even composite model airplanes.

Parts can be designed and printed to fit exactly a model you have or a model you plan to build, even if you are not building this model to the full size plan.

3D Printing, and 3D CAD allow us to create the actual parts to fit on our models but also allow us to create negative molds where we can make composite parts.

I´m adding this service to all the plan listings on the site knowing that not every part you imagine or need can be done, knowing this, jobs will be evaluated case by case and a price estimate will be given on request.

What can be done with 3D Printing:

  • Canopies
  • Cowls
  • Wheel Pants
  • Landing Gears
  • Wing Ribs
  • Motor Mounts
  • Servo Trays
  • Servo Covers
  • Wings
  • Fuselages
  • Complete Models

Full Models, Wings or Fuselages

It is possible to design a complete model for you but keep in mind that this is a lengthy process, many hours are needed to design and test a fully 3D Printed model. The finished model cannot have the same internal structure of the wooden made counterpart because it wouldn´t be possible to print it, it would have to have a structure like the models you can see in the 3D Printed Kits section of the site.

From the outside they are very loyal to the plan but still they have to be printed in sections, typically to fit a 250X210X200 mm cube that is the printer maximum build volume.

3D Printed planes are also heavier than light balsa models, all built up and ready to fly, with an electric power system they are generally a little lighter than the same model if it were powered by a glow engine. Please have a look at the 3D Printed kits section to have an idea on this.

Pricing

I will calculate a price upon request, please contact me here mentioning this PlanID: 80812 and the job you wish me to do.

Comments
Questions or comments about the Douglas SBD Dauntless? Your comments may help others to build this model...

Related Plans
Plans related to the main plan in this listing page.

NameSpanClassTypeUsePowerPublisherDesignerDate
Douglas S.B.D.5 Dauntless
ID:80831 | 5.3 MB
69 in. / 175.3 cm Radio-Control Airplane Bomber Glow-Powered C.A.P H.W. Taylor 06/1969
Douglas SBD-3 "Dauntless"
ID:93015 | 3.0 MB
--- Radio-Control --- --- --- --- --- ---
Douglas Dauntless SBD-3
ID:80808 | 1.2 MB
20 in. / 50.8 cm Free-Flight Airplane Bomber Rubber-Band-Powered --- --- ---
Douglas SBD-1 Dauntless
ID:80838 | 1.0 MB
15 in. / 38.1 cm Free-Flight Airplane Fighter Rubber-Band-Powered Whitman Publishing Co. --- 01/1941
Douglas SBD Dauntless
ID:102127 | 281.5 KB
32 in. / 81.3 cm Control-Line Airplane Fighter Glow-Powered Model Builder Roland H Baltes 08/1977
douglas sbd dauntless
ID:85939 | 91.2 KB
--- --- --- --- --- --- --- ---

3D Printed Kits
High Quality 3D Printed Kits in PLA, PET-G and ABS.

Das Liddle Stik
45.7in./116cm Span

Das Liddle Stik model airplane plan
Printed Kit in high quality PLA or PET.
Shipped in 3-4 business days. (PLA)

EBW-160 UAV
63in./160cm Span

EBW-160 UAV model airplane plan
Printed Kit in high quality PLA or PET.
Shipped in 3-4 business days. (PLA)

Eclipson Model T
45.7in./116cm Span

Eclipson Model T model airplane plan
Printed Kit in high quality PLA or PET.
Shipped in 2-3 business days. (PLA)

Free Plans
Download Free Model Plans.

Delfin
Free-Flight / Sport / 78 in. / 198 cm Span
Delfin model airplane plan
 144
Free-Flight
Glider
Ultimate
Radio-Control / Acro / 47.2 in. / 120 cm Span
Ultimate model airplane plan
 1053
Radio-Control
Airplane
Christen Eagle
Radio-Control / Acro / 49.6 in. / 126 cm Span
Christen Eagle model airplane plan
 890
Radio-Control
Airplane
Glow-Powered
Quickie Trainer C/L Speed
Quickie Trainer C/L Speed model airplane plan
 51
Control-Line
Airplane
Glow-Powered
Beechcraft Baron 58P
Radio-Control / Civilian / 70.5 in. / 179 cm Span
Beechcraft Baron 58P model airplane plan
 1143
Radio-Control
Airplane
Glow-Powered
Vintage Magazines by Hlsat
Share Your Plans With Us

AeroFred.com is a Plans Sharing Community, not just a website to grab some plans.

Every day thousands of modelers visit us and download free model airplane and boat plans, plans shared by other modelers...

If you have plans that are not here please upload them, so others can build from them.


Upload a Plan

Please login first

Details | Gallery | Article | Prints