Home Wood Model Airplane Plans Miles Hawk BW Print

Miles Hawk BW Print ( 52 in. / 132.1 cm )

Plan listing thumbnail Prev Next Plan
This is the Miles Hawk BW Print listing page, here you can download the plan, article and see the main thumbnail and extra images.

Miles Hawk BW Print model airplane plan

Miles Hawk BW Print

The Aeromodeller Plan service's Miles Hawk BW Print

The Miles M.2 Hawk was a 1930s British two-seat light monoplane designed by Miles Aircraft Limited.

The Hawk was designed in 1933 by F.G. Miles. The Hawk was a low-wing cantilever monoplane with wings designed to be folded. It had an open ------------pit for two in tandem. The prototype powered by a 95 hp ADC Cirrus IIIA engine was built by Philips and Powis Limited at Woodley Aerodrome and first flew on the 29 March 1933. A number of one off variants were built, including a cabin monoplane (M.2A), a long-range single-seater (M.2B) and three-seat versions for joy riding (M.2D). In 1934 due to a shortage of Cirrus engines an improved version was introduced, the Miles Hawk Major.

Production two-seat version with one 95 hp A.D.C. Cirrus IIIA engine.
Cabin version powered by a de Havilland Gipsy III engine, one built.
Long-range single-seater powered by an A.D.C Cirrus Hermes IV, one-built.
Re-engined with one 120 hp de Havilland Gipsy III engine, one built.
Three-seat version with one 95 hp A.D.C. Cirrus IIIA engine, six built.

General characteristics

Capacity: Two
Length: 40 ft 7 in (12.37 m)
Wingspan: 33 ft 0 in (10.06 m)
Height: 6 ft 8 in (2.03 m)
Wing area: 169 ft2 (15.7 m2)
Powerplant: 1 × ADC Cirrus IIIA piston engine, 95 hp (71 kW) each


Maximum speed: 115 mph (185 km/h)
Cruise speed: 100 mph (161 km/h)
Range: 450 miles (725 km)
Service ceiling: 16,000 ft (4,880 m)
Rate of climb: 860 ft/min (4.4 m/s)

Link to this page: https://aerofred.com/details.php?image_id=82689

Sources: https://en.wikipedia.org/wiki/Miles_Hawk
Details: Full Details
ID: 82689
File Size: 5.4 MB
Type: Airplane
Class: Free-Flight
Use: Racing
Motor: Glow-Powered
Motor Size:0.15-To-0.20-CI (2-strokes)
Wingspan: 52 in. / 132.1 cm
Publisher: The Aeromodeller Plan service
Magazines:  More at RCBookcase
Designer: D.P Goulding
Weight:29 Ounces
Listing Editor: hogal
Added: 31/03/2015 22:47
Updated: 04/04/16 12:48:32am
Corrections? Contact hogal
Need Help? Forum
Filetype: .pdfSoftware for .pdf files

Download Main Plan file, possible versions and from alternative sources if available.

  Order Prints

Plan details Prev Next Plan
These are the details for the "Miles Hawk BW Print" plan. If you would like to become a plan editor and help us to edit the attributes of all the plans in the website please click the "Edit Attributes" button below.

Plan Attributes: Edit Attributes
Plan ID:82689
Keywords:Trainer WWI open cockpit tail dragger
Model Type:Airplane
Aircraft Use:Racing
Wingspan: 52 in. / 132.1 cm
Wingspan Class:125cm-To-160cm (50in-To-63in)
Wing Position:Low-Mounted-Wing
Wing Style:Eliptical
Wing Dihedral:Dihedral
Landing Gear:Taildragger
Motor Type:Glow-Powered
Motor Size:0.15-To-0.20-CI (2-strokes)
Number of Motors:1-Tractor
Weight:29 Ounces
Weight Class:500g-To-1000g (17.6oz-To-35.2oz)
Construction Skills:Beginner
Pilot Skills:Beginner
Publisher:The Aeromodeller Plan service
Magazines:  More at RCBookcase
Designer:D.P Goulding
Restorer:aeromeddeler hogal
Category:Wood Model Airplane Plans
Similar:Plans like Miles Hawk BW Print

Thinking about this one? Prev Next Plan
If you know about a building log for this plane please post a comment, we will add it to the listing here.

Building Log on our forum
Start or participate on a building log at out forum

Order your Miles Hawk BW Print prints today!
The Miles Hawk BW Print plan can be printed on plain paper, tracing paper or polyester film and shipped worldwide.

Terms of Service.
Please read the Plans Printing Service Terms of Use before placing an order.

About the plan source:

You should verify if the source file has the quality for the type of construction you intend to do, we will print the file without any kind of enhancement or scaling. To know if the file is good please download it and open it on a pdf viewer like Adobe pdf viewer and set the view level or zoom level to 100% or 1:1 or full scale or actual size, depending on which version or pdf viewer you are using. Also, using the measuring tool make sure all the parts fit together and have the correct size.

Plans Scaling:

We can scale the Miles Hawk BW Print or any other PDF plan for you. But please keep in mind that if this plan is not vector, if you enlarge it too much the quality will be degraded.
To order a scaled plan please copy the plan url or the following ID (ID:82689) and send us a message with the desired wingspan and any other info you may find useful.

You will receive:

  • Waterproof Laser Printed plan on good quality Bond paper or/and Tracing Paper and/or Polyester sheet, depending on what you have purchased.
  • Rolled sheets, up to 5 or 6 in the same cardboard tube.
  • Envelope, up to 3 or 4 sheets per envelope.
  • Articles and Instructions if we have them for the given plan.
  • Air Mail, economic and reliable.

About our printers:

We use professional quality laser OCÉ and Canon printers/copiers, these printers use toner, not ink so the printings will be durable and waterproof.

About the different media types:

Bond Paper: White Bond paper, 80 grams per square meter.
Bond Tracing paper: Bond Tracing paper, 90 grams per square meter.
Polyester film: High quality polyester sheet incredibly durable, will resist cuts and glue and can be washed (I use it as sail material on my RC sailboats).


We will use brown padded envelopes for folded plans and hard cardboard tubes with plastic ends for rolled plans.


We ship from Portugal, Europe and use the reliable Portuguese mail system CTT.
CTT has delivery agreements with different entities on each country so if you´re from the US you may have your order delivered by USPS, in the UK may be Royal Mail and so on.
Orders are dispatched on the next or second business day after purchase.


We charge according to the ctt.pt postage table.


Tracking is available and is recommended.


Please keep in mind that when you order a plan it will be printed specifically for you, just like when you go to a local print shop.
Before ordering please make sure that the plan will fit your needs, in doubt please ask us for an opinion. If you still receive a plan you don´t like we can accept it back if it is in good conditions but we will not refund the postage from the initial order, you will have to pay the postage to return the plan to us and a 30% re-stock fee will be applied so please, in doubt, please ask us for an opinion.


Orders can be paid with Paypal or Credit Card via Paypal and are shipped to the address on your Paypal account or to the address you set at checkout.

About the Calculator:

The Plans Price Calculator will read the plan file and output all the information on the panel to the right according to the selected options, you can change the options and request a new quote at any time.
If you would like to print a plan that is not on the website you can upload it to the main plans category in pdf format, multiple sheets in the same pdf file, and use the Plans Price Calculator to get a quote and place the order.

Compact model airplane plan
Dornier Do-23 Sports Scale model airplane plan
Waco YMF-3 model airplane plan
Share Your Plans With Us

AeroFred.com is a Plans Sharing Community, not just a website to grab some plans.

Every day thousands of modelers visit us and download free model airplane and boat plans, plans shared by other modelers...

If you have plans that are not here please upload them, so others can build from them.

Upload a Plan

Please login first

Vintage Magazines by Hlsat
Details | Gallery | Building Log | Prints