Home Wood Model Airplane Plans PDF Bitmap Wood Model Airplane Plans Skaut

Skaut ( 55.9 in. / 142 cm )

Plan listing thumbnail Prev Next Plan
This is the Skaut listing page, here you can download the plan, article and see the main thumbnail and extra images.

Skaut model airplane plan


Modelar's Skaut


Type Model RC Sport Acro.
Wingspan 142cm Lowwing.Foam Wing.
Engine Glow 6.5cc.
Control 3 channels.
Designer Vaclav Paclt.
Magazine Modelar Mar.1991

This is a google translation from the CZ article:

Niodel Scout originated as a competitive category RC-M1 (without wings).
In this embodiment may be flown with him throughout the competition report. For sport flying model built with wings.

The basis of the hull sides of the balsa. 4 mm, reinforced in the front part beyond the drain-edge of the wing Vou plywood 0.8 mm. At the rear of the sidewall reinforced balsovýml strip-me 5x5 mm, in the lower part then balsa strips 7x7 mm triangular cross section. The lower rear part of the fuselage is covered with the balsa you. 2 mm summers transversely to the axis of the fuselage.

The front part of the hull made according to used engine muffler. When using the original silencer for MVVS 6.5 just slightly abraded edge of the hull. Those on the counter lightly glue (a few points) polystyrene block, which is directly on the hull trimmed into the shape of the bonnet. After processing to separate it from the hull '- \\\ and on its rear plate, we glue the polystyrene-wound with a thickness of about 15 mm, that by sand front. Polystyrene hoof stick over strips isolepy and Recreation přelaminujeme RC glass fabric.

The cabin is a prototype of the organic glass. 1 mm. The front part is molded, bent on the back foot. The cabin is framed by strips hammered sheets. Controlled tail wheel is a steel wire with a diameter of 2 mm, stored in a metal pipe, which is adhered and laminated to the stiffener plywood them. 3 mm; the whole is laminated to the hull. The wing has a profile E474, ribs Shoot-on rasp interpolation.

Both wing halves build separately. Finished přišrou adsorb wing to the fuselage and balsa shape the transition from the wing to the fuselage. The tail surfaces of balsa wood glue the strips of thickness. 7 mm.
Following on motor 6,5slepíme preferably on the glue dries, glue epoxies to Kick-tion styrofoam boxes, which take the Sime-flush with the ground. Whole balsa stick over them. 1 mm.

Rudders are honed Construction and description:

Vaclav Feeling Prague

Link to this page: https://aerofred.com/details.php?image_id=93605

Details: Full Details
ID: 93605
File Size: 758.4 KB
Type: Airplane
Class: Radio-Control
Use: Acro
Motor: Glow-Powered
Motor Size:0.40-To-0.60-CI (2-strokes)
Wingspan: 55.9 in. / 142 cm
Publisher: Modelar
Magazines:  More at RCBookcase
Designer: Vaclav Paclt
Date: 03/1991
Listing Editor: hlsat
Added: 14/12/2015 09:04
Updated: 03/09/16 10:58:18am
Corrections? Contact hlsat
Need Help? Forum
Filetype: .pdfSoftware for .pdf files

Member Profile for hlsat

Electronic Engineer

I started the hobby in October 1973.
First engine Cox Baby .049
First Radio Control Futaba 27Mhz 3 channels.
First Radio Control Plane Minnie Mambo Sterling one channel.

Support hlsat

hlsat is an Editor at AeroFred's. If you like his work with the plans you can reward him in one of the available methods:

PayPal - The safer, easier way to pay online!

Donate to hlsat's Paypal account.

Download Main Plan file, possible versions and from alternative sources if available.

  Order Prints  Article

Plan details Prev Next Plan
These are the details for the "Skaut" plan. If you would like to become a plan editor and help us to edit the attributes of all the plans in the website please click the "Edit Attributes" button below.

Plan Attributes: Edit Attributes
Plan ID:93605
Keywords:RC Sport Acro Modelar
Model Type:Airplane
Aircraft Use:Acro
Wingspan: 55.9 in. / 142 cm
Wingspan Class:125cm-To-160cm (50in-To-63in)
Wing Position:Low-Mounted-Wing
Motor Type:Glow-Powered
Motor Size:0.40-To-0.60-CI (2-strokes)
Number of Motors:1-Tractor
Magazines:  More at RCBookcase
Designer:Vaclav Paclt
Category:PDF Bitmap Wood Model Airplane Plans
Similar:Plans like Skaut

Thinking about this one? Prev Next Plan
If you know about a building log for this plane please post a comment, we will add it to the listing here.

Building Log on our forum
Start or participate on a building log at out forum

Order your Skaut prints today!
The Skaut plan can be printed on plain paper, tracing paper or polyester film and shipped worldwide.

Plans Service Calculator

This calculator will work on pdf and image format files, if the file is very large, 5 or even 10 Mb it will take longer to process the plan file, it may finish even after the button animation stops spinning, please be patient when calculating larger files.
* When ordering multiple plans you can set the Packaging Type as "None" on the second plan and up.

Ordering Prints
This tool allows you to calculate the cost of printing and shipping the Skaut plans and its building article if available.

How to use
  1. Set the options on the left and click the Calculate button
  2. Change the options to match your needs, Polyester plans must me shipped rolled.
  3. When you're happy with the results click the Paypal Button and finish the checkout.
  4. I will review the order, print and ship within one business day.
Ordering several plans
  1. If one of the plans is Tracing paper or Polyester, select Cardboard Tube and all the other options and click "Add To Cart"
  2. Add the second plan without Packaging "None"
  3. Only need to add Tracking once.
  4. If there is any overcharge we will issue a refund after shipping via Paypal.
Requesting a Resized Plan
  1. If you need to resize a plan please contact us with the ID:93605 and the desired wingspan.
  2. We will send you a resized pdf for evaluation and upload the new file to the site so you can place the order.
Printing plans that are not on the site
  1. The best option would be to upload the plan and use this calculator at it's page.
  2. Alternatively you can use this tool
  3. Please follow the instructions on that page.

Terms of Service.
Please read the Plans Printing Service Terms of Use before placing an order.

About the plan source:

You should verify if the source file has the quality for the type of construction you intend to do, we will print the file without any kind of enhancement or scaling. To know if the file is good please download it and open it on a pdf viewer like Adobe pdf viewer and set the view level or zoom level to 100% or 1:1 or full scale or actual size, depending on which version or pdf viewer you are using. Also, using the measuring tool make sure all the parts fit together and have the correct size.

Plans Scaling:

We can scale the Skaut or any other PDF plan for you. But please keep in mind that if this plan is not vector, if you enlarge it too much the quality will be degraded.
To order a scaled plan please copy the plan url or the following ID (ID:93605) and send us a message with the desired wingspan and any other info you may find useful.

You will receive:

  • Waterproof Laser Printed plan on good quality Bond paper or/and Tracing Paper and/or Polyester sheet, depending on what you have purchased.
  • Rolled sheets, up to 5 or 6 in the same cardboard tube.
  • Envelope, up to 3 or 4 sheets per envelope.
  • Articles and Instructions if we have them for the given plan.
  • Air Mail, economic and reliable.

About our printers:

We use professional quality laser OCÉ and Canon printers/copiers, these printers use toner, not ink so the printings will be durable and waterproof.

About the different media types:

Bond Paper: White Bond paper, 80 grams per square meter.
Bond Tracing paper: Bond Tracing paper, 90 grams per square meter.
Polyester film: High quality polyester sheet incredibly durable, will resist cuts and glue and can be washed (I use it as sail material on my RC sailboats).


We will use brown padded envelopes for folded plans and hard cardboard tubes with plastic ends for rolled plans.


We ship from Portugal, Europe and use the reliable Portuguese mail system CTT.
CTT has delivery agreements with different entities on each country so if you´re from the US you may have your order delivered by USPS, in the UK may be Royal Mail and so on.
Orders are dispatched on the next or second business day after purchase.


We charge according to the ctt.pt postage table.


Tracking is available and is recommended. Someone will have to sign the order at the delivery address.


Please keep in mind that when you order a plan it will be printed specifically for you, just like when you go to a local print shop.
Before ordering please make sure that the plan will fit your needs, in doubt please ask us for an opinion. If you still receive a plan you don´t like we can accept it back if it is in good conditions but we will not refund the postage from the initial order, you will have to pay the postage to return the plan to us and a 30% re-stock fee will be applied so please, in doubt, please ask us for an opinion.


Orders can be paid with Paypal or Credit Card via Paypal and are shipped to the address on your Paypal account or to the address you set at checkout.

About the Calculator:

The Plans Price Calculator will read the plan file and output all the information on the panel to the right according to the selected options, you can change the options and request a new quote at any time.
If you would like to print a plan that is not on the website you can upload it to the main plans category in pdf format, multiple sheets in the same pdf file, and use the Plans Price Calculator to get a quote and place the order.

Questions or comments about the Skaut? Your comments may help others to build this model...

By American standards.... Heywood12 on 30/08/2016 06:40
.....the plan is scanty, because there are no dimensions given in the plan and no plan of the wing. If you speak Czech, it's all in the article, including the airfoil type for the wing (Eppler E474 aerobatic).

Definitely a plan for the builder who was built a number of RCM magazine plans and has the skill to partially wing it.
By American standards.... hlsat on 30/08/2016 08:36
Czechs do not know why I'm Greek.
This plan to my knowledge has never been published in the magazine RCModeler.

Elijah Greece.
Please Login to Comment

S.T.O.L. Pidgeon model airplane plan
Sopwith Dolphin 5F-1 model airplane plan
Beppe V model airplane plan
Homer model airplane plan
Stribrny Sip VB41a model airplane plan
Share Your Plans With Us

AeroFred.com is a Plans Sharing Community, not just a website to grab some plans.

Every day thousands of modelers visit us and download free model airplane and boat plans, plans shared by other modelers...

If you have plans that are not here please upload them, so others can build from them.

Upload a Plan

Please login first

Vintage Magazines by Hlsat
Details | Article | Prints