Home PDF Bitmap Wood Plans from American Companies RC Delta

RC Delta ( 27.6 in. / 70 cm )

Plan listing thumbnail Prev Next Plan
This is the RC Delta listing page, here you can download the plan, article and see the main thumbnail and extra images.

RC Delta model airplane plan

RC Delta

Modelar's RC Delta

RC Delta

Type Model RC Sport.
Wingspan 70cm Delta.
Engine Diesel 1cc.
Control 1 channels.
Designer Petr Novak.
Magazine Modelar Aug.1985

Link to this page: https://aerofred.com/details.php?image_id=95787

Details: Full Details
ID: 95787
File Size: 709.3 KB
Type: Airplane
Class: Radio-Control
Use: Sport
Motor: Diesel-Powered
Motor Size:0.049-To-0.15-CI (2-strokes)
Wingspan: 27.6 in. / 70 cm
Publisher: Modelar
Magazines:  More at RCBookcase
Designer: Petr Novak
Date: 08/1985
Listing Editor: hlsat
Added: 20/01/2016 19:21
Updated: 20/01/16 07:22:58pm
Corrections? Contact hlsat
Need Help? Forum
Filetype: .pdfSoftware for .pdf files

Member Profile for hlsat

Electronic Engineer

I started the hobby in October 1973.
First engine Cox Baby .049
First Radio Control Futaba 27Mhz 3 channels.
First Radio Control Plane Minnie Mambo Sterling one channel.

Support hlsat

hlsat is an Editor at AeroFred's. If you like his work with the plans you can reward him in one of the available methods:

PayPal - The safer, easier way to pay online!

Donate to hlsat's Paypal account.

Download Main Plan file, possible versions and from alternative sources if available.

 Download Article Order Prints

Plan details Prev Next Plan
These are the details for the "RC Delta" plan. If you would like to become a plan editor and help us to edit the attributes of all the plans in the website please click the "Edit Attributes" button below.

Plan Attributes: Edit Attributes
Plan ID:95787
Keywords:RC Sport Delta Modelar
Model Type:Airplane
Aircraft Use:Sport
Wingspan: 27.6 in. / 70 cm
Wingspan Class:50cm-To-75cm (20in-To-30in)
Wing Style:Delta
Motor Type:Diesel-Powered
Motor Size:0.049-To-0.15-CI (2-strokes)
Number of Motors:1-Pusher
Magazines:  More at RCBookcase
Designer:Petr Novak
Category:PDF Bitmap Wood Plans from American Companies
Similar:Plans like RC Delta
File Details:
Date:20/01/2016 19:21
File size:709.3 KB

Thinking about this one? Prev Next Plan
If you know about a building log for this plane please post a comment, we will add it to the listing here.

Order your RC Delta prints today!
The RC Delta plan can be printed on plain paper, tracing paper or polyester film and shipped worldwide.

Plans Service Calculator
Scale: The stated wingspan for this model is 27.6 in. / 70 cm. Please Change the values below to order in a different wingspan.

1. Scaling up a plan too much will degrade the line quality.
2. Please make sure the stated wingspan is correct.
Discount Coupon:

Important Notice:

If your orders placed during the COVID pandemic are delayed the reason is the reduced number of airline flights and your national mail service not distributing mail as it normally would, please ask at your local post office what is the delay currently, we just can´t tell you any better than they.

The feedback from US customers who ordered during April and May is that orders are being delivered in about one month and a half. If you ordered Priority mail you can use the tracking code I added to the Paypal transaction at the USPS (or any other mail service) website.

Order Queue:

Current queue for new orders of 3d printed kits is 2 months. (Starting on the 20th of June 2020)

For printed plans there is no queue. Prints are posted next business day.

This calculator will work on pdf and image format files, if the file is very large, 5 or even 10 Mb it will take longer to process the plan file, it may finish even after the button animation stops spinning, please be patient when calculating larger files.

Ordering Prints
This tool allows you to calculate the cost of printing and shipping the RC Delta plans and its building article if available.

How to use
  1. Set the options on the left and click the Calculate button
  2. Change the options to match your needs, Polyester plans must me shipped rolled.
  3. When you're happy with the results click the Paypal Button and finish the checkout.
  4. I will review the order, print and ship within one business day.
  1. Make sure your Paypal address it´s correct.
  2. Make sure your Paypal email address it´s active, I will use it to communicate with you about the order and shipping. Or send me a message from the contact page so I can have your email address.
Download before ordering!
  1. Download and inspect the plan pdf file before ordering any prints, the paper prints will be made from it.
    You can use Adobe PDF Reader to open any PDF file, set the zoom to 100% and look at the line quality, use the tape measure tool to check the dimensions. This is your responsibility.

Terms of Service.
Please read the Plans Printing Service Terms of Use before placing an order.

What are you ordering:

You are ordering a print from the main PDF file in this listing, it´s exactly like taking this file in a thumb drive to a local print shop and ask them to make a print.

About the plan source:

You should verify if the source file has the quality for the type of construction you intend to do, we will print the file without any kind of enhancement or scaling. To know if the file is good please download it and open it on a pdf viewer like Adobe pdf viewer and set the view level or zoom level to 100% or 1:1 or full scale or actual size, depending on which version or pdf viewer you are using. Also, using the measuring tool make sure all the parts fit together and have the correct size.
In doubt please ask us for an opinion.

Plans Scaling:

We can scale this plan for you. But please keep in mind that if this plan is not vector, if you enlarge it too much the quality will be degraded.

You will receive:

  • Laser Printed plan on good quality Bond paper or/and Tracing Paper and/or Polyester sheet of the PDF file from this listing, depending on what you have purchased.
  • Rolled sheets, up to 5 in the same cardboard tube.
  • Envelope, up to 5 sheets per envelope.
  • Articles and Instructions if they are available and if you order them.
  • Air Mail, Priority, Priority Insured or Normal mail, according to your choice.

About our printers:

We use professional quality laser OCÉ and Canon printers/copiers, these printers use toner, not ink so the printings will be durable and waterproof.

About the different media types:

Bond Paper: White Bond paper, 80 grams per square meter.
Bond Tracing paper: Bond Tracing paper, 90 grams per square meter.
Polyester film: High quality polyester sheet incredibly durable, will resist cuts and glue and can be washed (I use it as sail material on my RC sailboats).


We charge by print length (914mm or 91,4cm or 36in. by the length of the print)
This means that a plan 120cm by 150cm will be charged two times 150cm because it will be printed in two tiles, a plan 91cm by 150cm will be charged one time its length or 150cm and a plan 91cm by 40cm will be charged 40cm.
The system will try to fit a plan in the 91,4cm of the printer width in order to reduce the costs or print length to the maximum. This is the same charging method used in any printshop.


We will use paper or waxed paper padded envelopes for folded plans and hard cardboard tubes with plastic ends for rolled plans, depending on your choice.


We ship from Portugal, Europe and use the reliable Portuguese mail system CTT.
CTT has delivery agreements with different entities on each country so if you´re from the US you may have your order delivered by USPS, in the UK may be Royal Mail and so on.
Orders are dispatched on the next or second business day after purchase.

Discount Coupons:

Discount coupons are valid from 3 to 30 days after purchase, you can use them any number of times you like but only once per item order.
The codes are issued in the Paypal invoice, please check the transaction details at Paypal website or in the Paypal email you received after purchase to get your Discount Coupon code.
You are free to post the Coupons online, give them to friends, share them in any way you like.
To use just Copy/Paste the Coupon code (i.e.: TAKE10#6012019) to the text field in the plan listing page to use your discount. No spaces and no manual typing, just copy/paste.


We charge according to the ctt.pt postage table.

Mailing Methods:

Normal Mail: Normal Mail is non traceable, use at your own risk, no insurance, total loss if the carrier loses it.
Priority: Priority Mail is traceable on your local/national mail system, it is not insured.
Priority Insured: Priority Insured Mail is traceable on your local/national mail system and is insured.


Please keep in mind that when you order a plan it will be printed specifically for you, just like when you go to a local print shop.
Before ordering please make sure that the plan will fit your needs, in doubt please ask us for an opinion. If you still receive a plan you don´t like we can accept it back if it is in good conditions but we will not refund the postage from the initial order, you will have to pay the postage to return the plan to us and a 30% re-stock fee will be applied so please, in doubt, please ask us for an opinion.


Orders can be paid with Paypal or Credit Card via Paypal and are shipped to the address on your Paypal account or to the address you set at checkout.

About the Calculator:

The Plans Price Calculator will read the plan file and output all the information on the panel to the right according to the selected options, you can change the options and request a new quote at any time.
If you would like to print a plan that is not on the website you can upload it to the main plans category in pdf format, multiple sheets in the same pdf file, and use the Plans Price Calculator to get a quote and place the order.

3D Printed Parts
Order 3D Printed Parts for the RC Delta

General Information

3D printing allow us to design not only complete airplane models but also parts to complete balsa, foam or even composite model airplanes.

Parts can be designed and printed to fit exactly a model you have or a model you plan to build, even if you are not building this model to the full size plan.

3D Printing, and 3D CAD allow us to create the actual parts to fit on our models but also allow us to create negative molds where we can make composite parts.

I´m adding this service to all the plan listings on the site knowing that not every part you imagine or need can be done, knowing this, jobs will be evaluated case by case and a price estimate will be given on request.

What can be done with 3D Printing:

  • Canopies
  • Cowls
  • Wheel Pants
  • Landing Gears
  • Wing Ribs
  • Motor Mounts
  • Servo Trays
  • Servo Covers
  • Wings
  • Fuselages
  • Complete Models

Full Models, Wings or Fuselages

It is possible to design a complete model for you but keep in mind that this is a lengthy process, many hours are needed to design and test a fully 3D Printed model. The finished model cannot have the same internal structure of the wooden made counterpart because it wouldn´t be possible to print it, it would have to have a structure like the models you can see in the 3D Printed Kits section of the site.

From the outside they are very loyal to the plan but still they have to be printed in sections, typically to fit a 250X210X200 mm cube that is the printer maximum build volume.

3D Printed planes are also heavier than light balsa models, all built up and ready to fly, with an electric power system they are generally a little lighter than the same model if it were powered by a glow engine. Please have a look at the 3D Printed kits section to have an idea on this.


I will calculate a price upon request, please contact me here mentioning this PlanID: 95787 and the job you wish me to do.

Questions or comments about the RC Delta? Your comments may help others to build this model...

Article Translation: Submitted to AeroFred on 20/01/2016 22:58
It is structurally very simple and in compliance with the low flying weight (600 g) has an income-ing flight characteristics. During the draft, I came from an older model ing. B. Horsten-Kehoe, whose plan was published years ago in the model-s. Further, the described model is powered by an engine with a displacement of 1 to 1.5 cm3 quality pusher propeller, sufficient to operate jednopovelová RC rig (like Mars) with magnetic tripper placed as close to the tail. Great attention should be paid to the choice of materials - balsa should be solid but not too heavy. The direction of the wood fiber in the individual parts are indicated in the drawing. The wing profile flat plate is made of thick balsa.
3, glued butt. Secondary parts A and B are whole. The outer parts are initially at C-bonded parts D of the plywood. 1 which, when gluing the subsoil beneath the trailing portion of 13 mm. Units are then glued to about 13; joint is taped strong paper. The leading edge is reinforced with pine bar with a cross section 3x3. When gluing the two halves we ensure adherence to dihedral (60 mm). Glued wing is plastered with paper thin viáknitým and top and bottom reinforced with pine slats E a cross section of 3 x 3 (by drawing). The fuselage is also made of balsa those. 3. The front part is made of balsa wood shavings stuck to thicker middle section of plywood thickness. The second sidewalls are at the rear
vyztuteny the plywood. The first engine mount and bulkhead are those of plywood. 5; the hull is sealed so that the engine was suppressed by about 3 °. Other counters are made from balsa and their deployment depends on the used RC kit, which also customize the cover, allowing access to them. The finished hull is also glued with thin paper. The canopy is molded under heat from organic glass thickness. 1 and glued to a wolf (to finish) hull. Great care must be glued to the fuselage landing skids of thick balsa. 10, lined with pine slats with a cross section 2x10. Baseplate both used to grasp the model at launch, both on landing protects the engine and propeller. The vertical tail is made of balsa button. 3; After sanding, varnishing and sticking paper is sealed into the recess in the hull. The rudder is suspended on nylon fabric strips; They must move freely, but without the clearance. The finish is appropriate to use colored paper, several nitro- repainting clear. When using colored enamels will increase the weight of the model! Protective lacquer coating against the effects of fuel is not necessary due to the pushing arrangement powerplant. RC sets should be deployed so that the center of gravity match the data in the drawing. On that condition depend flying characteristics! If the angles are preserved parts D wing and the suppression of the engine model is symmetrical and well balanced, makes for trouble-flying Delta. The model flies very stable, and its management is without guile. Petr Novak, Broumov

Related Plans
Plans related to the main plan in this listing page.

Climax Delta
ID:80307 | 4.9 MB
40 in. / 101.6 cm Radio-Control Airplane Sport Glow-Powered RCModeller Craig Ramskill 04/1993
Climax Delta
ID:92501 | 3.7 MB
100cm-To-125cm (40in-To-50in) Radio-Control Airplane Sport Glow-Powered RCModeler Clay Ramskill 04/1993
Cracker ( Delta)
ID:99798 | 738.1 KB
75cm-To-100cm (30in-To-40in) Radio-Control Airplane Bomber Glow-Powered MAP Etorri gatelli 01/1969
ID:99978 | 255.5 KB
29.1 in. / 74 cm Control-Line Airplane Sport Diesel-Powered Modelar Jar.Fara 10/1963
Jetex Delta
ID:83885 | 971.0 KB
17.25 in. / 43.8 cm Free-Flight Airplane Sport Jettex-Powered P.D.G. --- ---
ID:83225 | 1.6 MB
29 in. / 73.7 cm Radio-Control Airplane Sport Glow-Powered RCM Dave Greenfield 03/1980
ID:96896 | 1.6 MB
29 in. / 73.7 cm Radio-Control Glider Sport Glow-Powered RCModeler Dave Greenfield 03/1980
ID:99792 | 167.4 KB
43.3 in. / 110 cm Radio-Control Airplane Trainer Glow-Powered Modelar Frant Podany 10/1986
Rocket Delta
ID:94608 | 638.3 KB
18 in. / 45.7 cm Free-Flight Airplane --- Jettex-Powered --- --- ---
Spezi Delta
ID:98286 | 975.6 KB
60 in. / 152.4 cm Radio-Control Glider Slope Not-Powered Modelbau Lothar Wehmann ---

AeroFred Forums
Join the Forums and follow build logs and participate in discussions about the hobby.
Vintage Magazines
Hlsat makes this great website with contributions from around the world.
Unique Static Models
Albert from Catalonia produces these unique static models.

3D Printed Kits
High Quality 3D Printed Kits in PLA, PET-G and ABS.

48in./122cm Span

Mig-15 model airplane plan
Printed Kit in high quality PLA or PET.
Shipped in 3-4 business days. (PLA)

38.2in./97cm Span

SPITFIRE MK XVI model airplane plan
Printed Kit in high quality PLA or PET.
Shipped in 2-3 business days. (PLA)

28.3in./72cm Span

NUCKING FUTS model airplane plan
Printed Kit in high quality PLA or PET.
Shipped in 3-4 business days. (PLA)

Free Plans
Download Free Model Plans.

Nieuport 17 2
Free-Flight / Fighter / 11.8 in. / 30 cm Span
Nieuport 17 2 model airplane plan
Douglas O43-A 22in
Free-Flight / Sport / 22 in. / 55.9 cm Span
Douglas O43-A 22in model airplane plan
B-29 Scaled
Radio-Control / Bomber / 82.7 in. / 210 cm Span
B-29 Scaled model airplane plan
Stampe SV4
Radio-Control / Sport
Stampe SV4 model airplane plan
B 25
Radio-Control / Bomber / 101 in. / 256.5 cm Span
B 25 model airplane plan
Share Your Plans With Us

AeroFred.com is a Plans Sharing Community, not just a website to grab some plans.

Every day thousands of modelers visit us and download free model airplane and boat plans, plans shared by other modelers...

If you have plans that are not here please upload them, so others can build from them.

Upload a Plan

Please login first

Details | Article | Prints