Home Foam Model Airplane Plans Sorta Jumbo 3D

Sorta Jumbo 3D

Plan listing thumbnail Prev Next Plan
This is the Sorta Jumbo 3D listing page, here you can download the plan, article and see the main thumbnail and extra images.

Sorta Jumbo 3D model airplane plan

Sorta Jumbo 3D

DMorris Design's Sorta Jumbo 3D

Now, for something silly, here's the latest in my Sorta Series of 3D planes. What would you never see doing aerobatics? A Boeing 747 Jumbo Jet! So, for your amusement, here is the Sorta Jumbo 3D.
The plans have been uploaded to the Files section of this Group. From your computer (not phone) click on the "Files" or "More" link under the banner picture. Files takes you to the plans. Click on "Sorta Jumbo 3D Plans.pdf" to download. Then print them using the Poster feature in Adobe Reader DC and it will print the plans on letter size paper that you join together with tape.

The planes in this series can be constructed from 2 sheets of Dollar Tree Foam Board (DTFB) at a foam cost of $1.00 per sheet. You'll need four 9g servos, a 270-size motor, 10-20 amp ESC, 4-channel receiver, small piece of 1/8" plywood, and wire for landing gear, & pushrods,

Sorta' Series Model Planes
Recommended Sequence of Assembly

After cutting out all foam parts (and hinging them with 3M NexCare paper tape) and the plywood motor mount, assemble the plane in the following sequence.
I used Clear Gorilla Glue for strength, but hot-melt glue, or other suitable adhesives are acceptable.
1. Drill holes in motor mount to fit.
2. Glue motor mount in vertical part of fuselage and let dry /cure.
3. Cut temporary elevator slot extension. Save the piece to reuse or leave attached by cutting just the horizontal
edges and pushing the slot extension out of the way.
4. Glue elevator in place, replace foam removed in step 3.
5. Cut holes for servos in wing, then glue wing in place. Make sure the wing and elevator are "square" to the fuselage.
6. Glue fuselage sides in place with glue on top of wing, bottom of elevator, and edges of fuselage sides. Cover topside fuselage joint with paper tape to keep Gorilla glue foaming under control. Square everything up and clamp with clothes pins.
7. Form landing gear (if using), punch hole in fuselage and feed landing gear through. You may want to do this step before inserting the wing, but the wire gets in the way while doing step 6. Your call here. Glue the wire to the bottom of the wing and cover with paper tape.
8. Cut hole in fuselage under elevator to fit rudder and elevator servos.
9. Install control horns.
10. If you're going to paint, do it now.
11. Install servos, make pushrods and install them.
12. Cut ------------pit sides from .015" acetate to fit and install using narrow strips cut from 3M Clear Mounting Tape.
13. Mount the motor and prop. Position the ESC as needed and secure in place.
14. Position the 4-channel receiver so that the antenna does not come close to the carbon fiber spar and secure in place. The battery will be used for final balancing. Shift it around so that balance is achieved, and fasten it in place using Velcro tape.
15. Enjoy :) :) :) !!!

Link to this page: https://aerofred.com/details.php?image_id=96317

Details: Full Details
ID: 96317
File Size: 669.5 KB
Type: Airplane
Class: Radio-Control
Use: Acro
Motor: Electric-Powered
Motor Size:50-To-150-Watt 
Wingspan: 75cm-To-100cm (30in-To-40in)
Publisher: DMorris Design
Designer: Doug Morris
Date: 07/2015
Weight:10 oz.
Listing Editor: DMorrisPE
Added: 28/04/2016 19:21
Updated: 21/09/16 05:46:57am
Corrections? Contact DMorrisPE
Need Help? Forum
Filetype: .pdfSoftware for .pdf files

Member Profile for DMorrisPE

Hi! I'm DMorrisPE

I'm a retired Professional Civil Engineer living in Charlotte, NC. Been building and designing model airplanes since 1952, but just recently got into radio-controlled planes. Member of https://www.facebook.com/CharlotteAeromodelersClub/

Radio-Control Airplane Outdoor Various-Wood-Types

Download Main Plan file, possible versions and from alternative sources if available.


Plan details Prev Next Plan
These are the details for the "Sorta Jumbo 3D" plan. If you would like to become a plan editor and help us to edit the attributes of all the plans in the website please click the "Edit Attributes" button below.

Plan Attributes: Edit Attributes
Plan ID:96317
Keywords:R/C electric 3D 4-channel
Model Type:Airplane
Aircraft Use:Acro
Wingspan Class:75cm-To-100cm (30in-To-40in)
Wing Position:Mid-Mounted-Wing
Wing Style:Swept-Back
Wing Dihedral:Flat
Landing Gear:Tricycle
Motor Type:Electric-Powered
Motor Size:50-To-150-Watt 
Number of Motors:1-Tractor
Weight:10 oz.
Weight Class:200g-To-300g (7.0oz-To-10.5oz)
Construction Skills:Low-Intermediate
Pilot Skills:Low-Intermediate
Publisher:DMorris Design
Designer:Doug Morris
Restorer:Have you restored this Plan? Request transfer to your account
Category:Foam Model Airplane Plans
Similar:Plans like Sorta Jumbo 3D

Thinking about this one? Prev Next Plan
If you know about a building log for this plane please post a comment, we will add it to the listing here.

Building Log on our forum
Start or participate on a building log at out forum

Order your Sorta Jumbo 3D prints today!
The Sorta Jumbo 3D plan can be printed on plain paper, tracing paper or polyester film and shipped worldwide.

Plans Service Calculator

This calculator will work on pdf and image format files, if the file is very large, 5 or even 10 Mb it will take longer to process the plan file, it may finish even after the button animation stops spinning, please be patient when calculating larger files.
* When ordering multiple plans you can set the Packaging Type as "None" on the second plan and up.

Ordering Prints
This tool allows you to calculate the cost of printing and shipping the Sorta Jumbo 3D plans and its building article if available.

How to use
  1. Set the options on the left and click the Calculate button
  2. Change the options to match your needs, Polyester plans must me shipped rolled.
  3. When you're happy with the results click the Paypal Button and finish the checkout.
  4. I will review the order, print and ship within one business day.
Ordering several plans
  1. If one of the plans is Tracing paper or Polyester, select Cardboard Tube and all the other options and click "Add To Cart"
  2. Add the second plan without Packaging "None"
  3. Only need to add Tracking once.
  4. If there is any overcharge we will issue a refund after shipping via Paypal.
Requesting a Resized Plan
  1. If you need to resize a plan please contact us with the ID:96317 and the desired wingspan.
  2. We will send you a resized pdf for evaluation and upload the new file to the site so you can place the order.
Printing plans that are not on the site
  1. The best option would be to upload the plan and use this calculator at it's page.
  2. Alternatively you can use this tool
  3. Please follow the instructions on that page.

Terms of Service.
Please read the Plans Printing Service Terms of Use before placing an order.

About the plan source:

You should verify if the source file has the quality for the type of construction you intend to do, we will print the file without any kind of enhancement or scaling. To know if the file is good please download it and open it on a pdf viewer like Adobe pdf viewer and set the view level or zoom level to 100% or 1:1 or full scale or actual size, depending on which version or pdf viewer you are using. Also, using the measuring tool make sure all the parts fit together and have the correct size.

Plans Scaling:

We can scale the Sorta Jumbo 3D or any other PDF plan for you. But please keep in mind that if this plan is not vector, if you enlarge it too much the quality will be degraded.
To order a scaled plan please copy the plan url or the following ID (ID:96317) and send us a message with the desired wingspan and any other info you may find useful.

You will receive:

  • Waterproof Laser Printed plan on good quality Bond paper or/and Tracing Paper and/or Polyester sheet, depending on what you have purchased.
  • Rolled sheets, up to 5 or 6 in the same cardboard tube.
  • Envelope, up to 3 or 4 sheets per envelope.
  • Articles and Instructions if we have them for the given plan.
  • Air Mail, economic and reliable.

About our printers:

We use professional quality laser OCÉ and Canon printers/copiers, these printers use toner, not ink so the printings will be durable and waterproof.

About the different media types:

Bond Paper: White Bond paper, 80 grams per square meter.
Bond Tracing paper: Bond Tracing paper, 90 grams per square meter.
Polyester film: High quality polyester sheet incredibly durable, will resist cuts and glue and can be washed (I use it as sail material on my RC sailboats).


We will use brown padded envelopes for folded plans and hard cardboard tubes with plastic ends for rolled plans.


We ship from Portugal, Europe and use the reliable Portuguese mail system CTT.
CTT has delivery agreements with different entities on each country so if you´re from the US you may have your order delivered by USPS, in the UK may be Royal Mail and so on.
Orders are dispatched on the next or second business day after purchase.


We charge according to the ctt.pt postage table.


Tracking is available and is recommended. Someone will have to sign the order at the delivery address.


Please keep in mind that when you order a plan it will be printed specifically for you, just like when you go to a local print shop.
Before ordering please make sure that the plan will fit your needs, in doubt please ask us for an opinion. If you still receive a plan you don´t like we can accept it back if it is in good conditions but we will not refund the postage from the initial order, you will have to pay the postage to return the plan to us and a 30% re-stock fee will be applied so please, in doubt, please ask us for an opinion.


Orders can be paid with Paypal or Credit Card via Paypal and are shipped to the address on your Paypal account or to the address you set at checkout.

About the Calculator:

The Plans Price Calculator will read the plan file and output all the information on the panel to the right according to the selected options, you can change the options and request a new quote at any time.
If you would like to print a plan that is not on the website you can upload it to the main plans category in pdf format, multiple sheets in the same pdf file, and use the Plans Price Calculator to get a quote and place the order.

Questions or comments about the Sorta Jumbo 3D? Your comments may help others to build this model...

Please Login to Comment

Related Plans
Plans related to the main plan in this listing page.

Sorta' Juggy 3D
ID:96206 | 650.9 KB
32 in. / 81.3 cm Radio-Control Airplane Acro Electric-Powered DMorris Design Doug Morris 10/2015
1-2A Foam Learjet model airplane plan
cap model airplane plan
superhornet1 model airplane plan
Share Your Plans With Us

AeroFred.com is a Plans Sharing Community, not just a website to grab some plans.

Every day thousands of modelers visit us and download free model airplane and boat plans, plans shared by other modelers...

If you have plans that are not here please upload them, so others can build from them.

Upload a Plan

Please login first

Vintage Magazines by Hlsat
Details | Prints