Home PDF Bitmap Foam Plans Polaris

Polaris ( 29 in. / 73.7 cm )


Plan listing thumbnail Prev Next Plan
This is the Polaris listing page, here you can download the plan, article and see the main thumbnail and extra images.

Polaris model airplane plan

Polaris

Steve Shumate's Polaris

Welcome to the Polaris seaplane parkflyer! This model is a parkflyer adaptation of Laddie Mikulasko's beautiful North Star seaplane. It features simple sheet foam construction and excellent handling qualities, both in the air and on the water. In flight this model is smooth and stable, yet also very aerobatic. On the water it tracks straight as a narrow and takes off and lands effortlessly. But one of my favorite things about this model is the amazing speed range—with the recommended power setup the top speed is in excess of 70mph, yet the model slows down well and can plop down into the water at high alpha under full control at less than 10mph. This allows the model to be flown in very tight spaces if desired, or if you have a bigger flying site you can openit up and enjoy the speed. It handles wind and waves remarkably well, too. This model also flies very well off of grass—take offs require only 10-20 feet and it can even taxi and do easy touch and goes off of grass.
Power recommendations:
We've been doing a lot of flight testing with the Polaris and have settled on two power packages that work very well.
The 2212-6 motor will offer the best performance, and is great if you have a lot of larger packs in the 2100 range. But we really like the 2212-10 running on a good 1300 or 1320 pack.
We recommend cooling vents since the ESC is fully enclosed.
Optional Heat Sink:
The optional heat sink provides additional cooling for the ESC. In fact, we've found by using the heat sink, additional venting is not necessary. This makes sealing up your Polaris a snap! Simply trim off the shrink tube from the flat part of the ESC, apply a small amount of the included thermal paste to the heast sink, and then secure it with a small amount of CA or epoxy. Size: 28 mm x 28 mm x 12 mm, weighs 8 grams
High Power Set-up (recommended)
Motor - Spin Max 2212-6 (2200 kv)
ESC - 30 amp minimum, 40 amp recommended, cooling vents recommended
Prop - APC 6/4 E
Battery - 3 cell lipo, 1300 mah (min. 25C) to 2250 mah
Mid Power Set-up
Motor - Spin Max 2212-10 (1400 kv)
ESC - 30 amp minimum, cooling vents recommended
Prop - APC 7/5E or 7/6 Slow Fly
Battery - 3 cell lipo, 1200 to 1320 recommended, up to 2100
Specifications
Wingspan–29"
Length–38.4"
AUW–17-22 oz.
Wing area-343 sq. in.
Wing loading-8.4 oz./sq. ft.
Motor-Spin Max 2212-6 or equivalent
ESC-30 amp
Prop APC 6/4E
Battery-1300 to 2100 3 cell lipo
Controls-Aileron, elevator, rudder, throttle
Requires 3 micro servos (9 gram)

Link to this page: https://aerofred.com/details.php?image_id=99044

Details: Full Details
ID: 99044
File Size: 74.1 KB
Type: Airplane
Class: Radio-Control
Use: Multirole
Scale:Scale (1:16)
Motor: Electric-Powered
Motor Size:150-To-300-Watt 
Wingspan: 29 in. / 73.7 cm
Publisher: Steve Shumate
Pub. Ref: 956
Designer: Steve Shumate
Date: 08/2008
Weight:10.5 oz.
Material:Foam-Depron
Listing Editor: iubitahp2000
Added: 23/02/2017 21:53
Updated: 02/03/17 03:06:06pm
Corrections? Contact iubitahp2000
Need Help? Forum
Filetype: .pdfSoftware for .pdf files

Downloads
Download Main Plan file, possible versions and from alternative sources if available.



Video
Videos for the Polaris.

Plan details Prev Next Plan
These are the details for the "Polaris" plan. If you would like to become a plan editor and help us to edit the attributes of all the plans in the website please click the "Edit Attributes" button below.

Plan Attributes: Edit Attributes
Plan ID:99044
Keywords:polaris
Class:Radio-Control
Model Type:Airplane
Channels:4-ch
Functions:Ailerons-Elevator-Rudder-Throttle
Aircraft Use:Multirole
Wingspan: 29 in. / 73.7 cm
Wingspan Class:50cm-To-75cm (20in-To-30in)
Wing Position:Low-Mounted-Wing
Wing Style:Delta
Wing Dihedral:Flat
Landing Gear:Floatplane
Motor Type:Electric-Powered
Motor Size:150-To-300-Watt 
Number of Motors:1-Tractor
Weight:10.5 oz.
Weight Class:300g-To-500g (10.5oz-To-17.6oz)
Material:Foam-Depron
Construction Skills:Novice
Pilot Skills:Novice
Publisher:Steve Shumate
Date:08/2008
Reference:956
Designer:Steve Shumate
Restorer:Rc Aeromodelism
Category:PDF Bitmap Foam Plans
Similar:Plans like Polaris

Thinking about this one? Prev Next Plan
If you know about a building log for this plane please post a comment, we will add it to the listing here.

Building Log 1: https://www.rcgroups.com/forums/showthread.php?922465-Polaris-Seaplane-Parkflyer

Order your Polaris prints today!
The Polaris plan can be printed on plain paper, tracing paper or polyester film and shipped worldwide.

Plans Service Calculator
Region:
Media:
Scale: The original wingspan for this model is 29 in. / 73.7 cm. Please Change the values below to order in a different wingspan.

Warning:
1. Scaling up a plan too much will degrade the line quality.
2. Please make sure the stated wingspan is correct.
Packaging:
Mail:

This calculator will work on pdf and image format files, if the file is very large, 5 or even 10 Mb it will take longer to process the plan file, it may finish even after the button animation stops spinning, please be patient when calculating larger files.

If second plan and up choose "2nd & Up" in the packaging option.

Ordering Prints
This tool allows you to calculate the cost of printing and shipping the Polaris plans and its building article if available.

How to use
  1. Set the options on the left and click the Calculate button
  2. Change the options to match your needs, Polyester plans must me shipped rolled.
  3. When you're happy with the results click the Paypal Button and finish the checkout.
  4. I will review the order, print and ship within one business day.
Important!
  1. Make sure your Paypal address it´s correct.
  2. Make sure your Paypal email address it´s active, I will use it to communicate with you about the order and shipping. Or send me a message from the contact page so I can have your email address.
  3. Download and inspect the plan pdf file, the paper prints will be made from it.
Ordering several plans
  1. If one of the plans is Tracing paper or Polyester, select Cardboard Tube and all the other options and click "Add To Cart"
  2. Select "2nd & Up" as packaging
  3. Only need to add Tracking once.
  4. If there is any overcharge we will issue a refund after shipping via Paypal.
Requesting a Resized Plan
  1. If you need to resize a plan please contact us with the ID:99044 and the desired wingspan.
  2. We will send you a resized pdf for evaluation and upload the new file to the site so you can place the order.
Printing plans that are not on the site
  1. The best option would be to upload the plan and use this calculator at it's page.

Terms of Service.
Please read the Plans Printing Service Terms of Use before placing an order.

About the plan source:

You should verify if the source file has the quality for the type of construction you intend to do, we will print the file without any kind of enhancement or scaling. To know if the file is good please download it and open it on a pdf viewer like Adobe pdf viewer and set the view level or zoom level to 100% or 1:1 or full scale or actual size, depending on which version or pdf viewer you are using. Also, using the measuring tool make sure all the parts fit together and have the correct size.

Plans Scaling:

We can scale the Polaris or any other PDF plan for you. But please keep in mind that if this plan is not vector, if you enlarge it too much the quality will be degraded.
To order a scaled plan please set the desired wingspan in the form above or copy the plan url or the following ID (ID:99044) and send us a message with the desired wingspan and any other info you may find useful.

You will receive:

  • Laser Printed plan on good quality Bond paper or/and Tracing Paper and/or Polyester sheet, depending on what you have purchased.
  • Rolled sheets, up to 5 or 6 in the same cardboard tube.
  • Envelope, up to 3 or 4 sheets per envelope.
  • Articles and Instructions if they are available and if you order them.
  • Air Mail, Priority or Normal.

About our printers:

We use professional quality laser OCÉ and Canon printers/copiers, these printers use toner, not ink so the printings will be durable and waterproof.

About the different media types:

Bond Paper: White Bond paper, 80 grams per square meter.
Bond Tracing paper: Bond Tracing paper, 90 grams per square meter.
Polyester film: High quality polyester sheet incredibly durable, will resist cuts and glue and can be washed (I use it as sail material on my RC sailboats).

Packaging:

We will use brown padded envelopes for folded plans and hard cardboard tubes with plastic ends for rolled plans.

Shipping:

We ship from Portugal, Europe and use the reliable Portuguese mail system CTT.
CTT has delivery agreements with different entities on each country so if you´re from the US you may have your order delivered by USPS, in the UK may be Royal Mail and so on.
Orders are dispatched on the next or second business day after purchase.

Postage:

We charge according to the ctt.pt postage table.

Priority Mail vs Normal Mail:

Priority mail will arrive faster and be traceable on your national mail system tracking page, for US, USPS, for UK Royal Mail, will also be traceable on multiple online trackers and on the Portuguese CTT page.
Normal mail is non traceable, use at your own risk, no insurance, total loss if the carrier loses it.

Returns:

Please keep in mind that when you order a plan it will be printed specifically for you, just like when you go to a local print shop.
Before ordering please make sure that the plan will fit your needs, in doubt please ask us for an opinion. If you still receive a plan you don´t like we can accept it back if it is in good conditions but we will not refund the postage from the initial order, you will have to pay the postage to return the plan to us and a 30% re-stock fee will be applied so please, in doubt, please ask us for an opinion.

Payments:

Orders can be paid with Paypal or Credit Card via Paypal and are shipped to the address on your Paypal account or to the address you set at checkout.

About the Calculator:

The Plans Price Calculator will read the plan file and output all the information on the panel to the right according to the selected options, you can change the options and request a new quote at any time.
If you would like to print a plan that is not on the website you can upload it to the main plans category in pdf format, multiple sheets in the same pdf file, and use the Plans Price Calculator to get a quote and place the order.

Comments
Questions or comments about the Polaris? Your comments may help others to build this model...

Love pecanpatch on 24/02/2017 12:40
I love my Polaris! it is 5 years old now....... I wish I could upload a picture.....
Polaris derfred on 24/02/2017 14:46
Hi!

You can upload at the forum, and you can even start a build thread at the forum or here and it will be displayed at the building logs tab.
Plans boaterbill1 on 24/02/2017 15:36
Is there available a non tiled version of these plans?
Non tiled iubitahp2000 on 24/02/2017 16:23
Quote from: boaterbill1 at 24/02/2017 15:36
Is there available a non tiled version of these plans?

Yes. - here: https://www.dropbox.com/s/4ej9ar2awlxi635/ Polaris%20Assembly%20Drawing%20%28Nontil
ed%29.pdf?dl=0
Construction Guide iubitahp2000 on 24/02/2017 16:25
Quote from: derfred at 24/02/2017 14:46
Hi!

You can upload at the forum, and you can even start a build thread at the forum or here and it will be displayed at the building logs tab.


Here the construction guide:
https://www.dropbox.com/s/o1u55bajnk21vjz/ Polaris%20Construction%20Guide%20Scratch
build.pdf?dl=0
Tiled print boaterbill1 on 24/02/2017 17:55
Thanks for the assembly drawing, but is there a full drawing of all the parts on 1 page?
It would make cutting them out so much easier.
Is there a build log available too?
I think this will be my next project.
Thanks again for the quick response.
Preview iubitahp2000 on 24/02/2017 18:28
No, i dont have, sorry. Only parts preview. More stuff you can find here: https://www.dropbox.com/sh/ums9ez5mkmmu7js/AADNFJUF5hndjASElwvkpmHea?dl=0
Polaris Saab9 on 25/02/2017 04:18
Thanks Steve, having had Laddie's original. This be my next build.
Polaris derfred on 25/02/2017 12:56
I´ve switched the tiled for the non tiled as the main plan, the tiled for those who want it is available as a version. Thank you for uploading.
Plans switched iubitahp2000 on 25/02/2017 13:52
Quote from: derfred at 25/02/2017 12:56
I´ve switched the tiled for the non tiled as the main plan, the tiled for those who want it is available as a version. Thank you for uploading.

The non tiled plan is not a plan, its only a preview of dimensions of the Polaris
Polaris derfred on 25/02/2017 14:38
ok, I didn´t noticed that. I´ll switch back. If you like you can include all those files as supplemental files under the Media tab at the plan edit page.
CG sigfazer on 20/10/2017 16:29
where is the CG on this plane?
CG iubitahp2000 on 25/12/2017 16:32
Look on plans, the cg is mark somewhere there

Related Plans
Plans related to the main plan in this listing page.

NameSpanClassTypeUsePowerPublisherDesignerDate
Polaris
ID:83382 | 235.6 KB
20 in. / 50.8 cm Free-Flight Glider Thermal Not-Powered --- --- ---

3D Printed Kits
High Quality 3D Printed Kits in PLA, PET-G and ABS.

F-4U Corsair
74.8in./190cm Span

F-4U Corsair model airplane plan
Printed Kit in high quality PLA or PET.
Shipped in 6-8 business days. (PLA)

P38 Lightning (Scaled Up)
72in./183cm Span

P38 Lightning (Scaled Up) model airplane plan
Printed Kit in high quality PLA or PET.
Shipped in 3-4 business days. (PLA)

STEARMAN PT-17 KAYDET
48in./122cm Span

STEARMAN PT-17 KAYDET model airplane plan
Printed Kit in high quality PLA or PET.
Shipped in 4-5 business days. (PLA)

Free Plans
Download Free Model Plans.

Share Your Plans With Us

AeroFred.com is a Plans Sharing Community, not just a website to grab some plans.

Every day thousands of modelers visit us and download free model airplane and boat plans, plans shared by other modelers...

If you have plans that are not here please upload them, so others can build from them.


Upload a Plan

Please login first

Vintage Magazines by Hlsat
Details | Supplemental | Building Log |