Home 3D Printed Model Airplanes 3DLabPrint MESSERSCHMITT BF 109 F


Due to an unanticipated demand on the 3D printed kits there is a waiting queue for production of around 10 days.

If you don´t mind to wait this long your order is welcome.

I will keep you informed about your order status, when it enters production and after its shipped.

MESSERSCHMITT BF 109 F order page.

MESSERSCHMITT BF 109 F ( 35 in. / 89 cm )49.00 Eur.

We are proud to present the latest in Model Airplanes building technology, 3DLabPrint's creations. We will print on demand a high quality print of the MESSERSCHMITT BF 109 F for you.

MESSERSCHMITT BF 109 F model airplane plan


MESSERSCHMITT BF 109 F High quality 3D Printed Kit
Printed Model Airplanes FAQ

3D Printed on PLA bioplastic MESSERSCHMITT BF 109 F

Lenght: 771mm(30.35in)
Wingspan: 890mm(35.0in)
Height: 170mm(6.7in)
Wing area: 16.1 dm2
Wing loading: 51.0 g/dm2
Airfoil: aircombat modificated

Print weight: 410g(14.5oz)
Takeoff weight (6s 1300 lipo): 821g(28.9oz)
Max takeoff weight: 960g(33.8oz)
Never exceed speed, VNE: 205km/h
Design maneuvering speed, VA: 165km/h
Stall speed, VS: 33km/h

Propeller: aeronaut ELP 9/6 or APC 9/6 – 9/7.5
Motor: AX-4008Q/620KV, 22pole brushless HE electric motor
ESC: Castle Creations TALON 25
Battery: Turnigy nanotech 1300 mAh/6s/22.2V, 206g, 25C
Performance measurment
Max RPM and Amps (static): 12 000/min with APC 9/6, current 19A
11 550/min with APC 9/7.5, current 21A
Max RPM and Amps (level flight): 13 700/min with APC 9/6, current 12A
12 400/min with APC 9/7.5, current 13.5A
Max speed VH (level flight): 135 km/h – 67.5kn – 78 mph with APC 9/6
150 km/h – 73kn – 84 mph with APC 9/7.5
Rate of climb: 29 m/s (5 373 ft/min) with APC 9/6
32 m/s (5 728 ft/min) with APC 9/7.5
Flight time (6s 1300mAh/full): 7:40 with APC 9/6
5:30 with APC 9/7.5
7:40 with aeronaut ELP 9/6

See video guide #6 (for HP setup)
Motor – AX-4008Q-620KV
Speed controler (ESC) – CC Talon 25 or similar at least 20A/6s
3x PAIRS, 3.5mm Gold Connectors - optional
Battery 1300mAh/6s – or 2x 1300/3s (use 2to1 serial connector)
Male XT60 connector
Shrink Tube black
Solder wire and Soldering Iron

Turnigy D3530/14 1100KV or similar 3530-35 1100kv
30A Electronic Speed Controller or similar 30-40Amps
Turnigy 2200mAh 3S 20C or similar 1500-2400/3s

Full Specs and Building Manual

Here you can find the complete instructions and specifications to the MESSERSCHMITT BF 109 F.

Download Manual

Important Recommendation

This is almost common sense but, like any other model airplane, these 3D printed models can´t stand too much heat, they may become deformed. Temperatures above 50º centigrades will cause these models to deform and it will be very difficult, if not impossible, to get them back to shape. These planes, if made or painted in dark colors shouldn´t be left in the sun in hot days and shouldn´t be left inside of a car in the sun.

Recommended CA Glue

HK Medium thickness CA

HK Accelerator

This glue and accelerator have been tested and work on PLA, not all glues and accelerators, specially the accelerators work well. If you purchase the MESSERSCHMITT BF 109 F Kit I will include a piece of printed PLA so you can do your tests.

Recommended Power Sets

You can find links to the power sets components in the user manual.

Video Guides

3DLabPrint has uploaded the following MESSERSCHMITT BF 109 F to their Youtube Channel.

Details: Full Details
ID: 99261
Type: Airplane
Class: Radio-Control
Use: Fighter
Motor: Electric-Powered
Motor Size:300-To-500-Watt 
Wingspan: 35 in. / 89 cm
Publisher: 3DLabPrint
Designer: 3DLabPrint
Weight:820 g

About 3D Printed Model Airplanes
If you have doubts about how these models are designed, printed and how the fly, this page is for you.

Before anything else, watch this video.

The most common question I get is:

-How do these planes fly?

The video at the right is from FliteTest's Youtube channel, they installed cameras on the plane and filmed it in flight with a drone, these images are not only spectacular but they also allow us to see the behavior of the plane in flight. Enjoy!

This P-38 in the video requires:

  • 12 channels radio if you don´t use y-cables.
  • 4-5 full days straight to print on one printer if everything goes well.

All our 3D Printed planes are here.

About 3DLabPrint models

These models are designed by Stepen in the Czech Republic, are easy and quick to build and have excellent flight characteristics. The gear is pretty standard, usually 9 or 12 grams servos and two power setups are usually suggested, one composed of high quality motor, ESC and battery and another made from inexpensive HobbyKing stuff but still very capable and with good performance.

When you build from a plan or when you assemble a wood kit, usually you add parts to a developing structure, you may have the fuselage done then you may add a servo tray then you may add a motor mount and so on, on these printed planes everything is built with full integration in mind, all the internal reinforcements, all the linkages, all the ducts for wiring, all the fixtures are one with the structure, in fact, many times you have ducts for the servo wires acting as an internal wing reinforcement.

This is a revolutionary way of thinking or better, a revolutionary way of fabricating model airplanes because many of us had already thought about how good this kind of approach could be but actually doing it has always been the problem.

Even with the advent of high quality/low cost 3D printers this has not became immediately possible, it took a very gifted person, Stepen, to create a design method and correspondent print setting to make these marvelous models possible.

I hope you are not afraid to try the latest in model airplane construction, I´m sure you will be delighted with these amazing model airplanes.

A FAQ page with answers to the most common questions can be found here.

All questions are welcome. Please contact us here.

3D Printed Planes Gallery
These are just a few examples of the amazing internal structures you will find on a 3D printed model airplane.

Order 3D Printed MESSERSCHMITT BF 109 F
Please select the options below to order or add the MESSERSCHMITT BF 109 F to your favorites.

Order the MESSERSCHMITT BF 109 F kit or partsFAQ
Complete Kit:
Complete KIT.
Spare Parts and Options:
All the components can be printed on demand.
Printed Manual:
Free but adds 100 grams of weight!
Download Manual
PLA can be painted with acrylic spray.

Ordering a 3D Printed "MESSERSCHMITT BF 109 F"" Kit
This tool allows you to calculate the cost of printing and shipping the MESSERSCHMITT BF 109 F model airplane and/or spare parts.

How to order:
  1. Set the options on the left and click the "Calculate" button
  2. Change the options as needed and click "Calculate" button again.
  3. When you're happy with the results click the Paypal Button and finish the checkout at Paypal´s website.
  4. I will review the order, print and ship.
  5. Printing the MESSERSCHMITT BF 109 F takes approximately 48 hours, for this reason there is a small production queue.
Packaging & Postage:
  1. Larger parts individually bagged then everything in one larger bag so nothing gets lost or damaged.
  2. Cardboard box with bubble wrap cushioning.
  3. Shipped by Airmail with Tracking Code.
  1. The PDF Assembly manual has links to web pages where you can obtain the needed electronics and even some supplies.
  2. On multiple kits orders, each kit will be shipped on an individual box, it wouldn't be cheaper to ship combined.

Terms of Service.
Please read the 3D Printing Service Terms of Use before placing an order.

About the 3D File source:

The MESSERSCHMITT BF 109 F was designed by 3DLabPrint and will be printed by AeroFred.

Model Printing and Order Processing:

Printing a model airplane requires many hours of printing, typically, for the models we sell, between 24 and 72 hours. Since we print on demand your order will be queued. Please contact us to know the current waiting time.


Models from 3DLabPrint can´t be scaled because we don´t have access to the original 3D CAD files to do a proper scaling. When these models are printed all the needed fixtures for motor, battery pack, servos, links, wiring ducts are also printed so they would all be scaled making them impossible to use.


The models from 3DLabPrint are supplied as print files only, we don´t have access to original 3D CAD files so I can´t do modifications. However, PLA glues very well with CA and accelerator so you can do as in any other model airplane kit, you can add balsa or lite ply and you can make any modifications yourself.

You will receive:

  • Complete MESSERSCHMITT BF 109 F 3D Printed KIT on PLA or individual parts for the same model, depending on your order.
  • One piece of printed PLA, some bad print I may have around here, so you can do your experiments and tests instead of trying on the plane itself.
  • Cardboard box with appropriate cushioning so the parts are protected during the shipment.
  • Assembly manual printed copy from 3DLabPrint if requested at the ordering page.

The paper manual is free but not included by default because it adds 100 grams of weight and this may make the postage costs climb considerably. In any case you will always receive a download link to the manual in pdf format.

You will NOT receive:

  • Glue.
  • Electronic components
  • Wheels, hinges, propellers, screws, piano wire, paint or decals.

Assembly and preparation:

Modeling work it´s your job :)
You will have to follow the manual to assembly this kit and do all the work needed, this is a model airplane Kit, not a toy.

About our printers:

We use high quality original 3D Printers, no Chinese clone printers or cheap Ebay 3dprinters.

About the different filament types:

PLA (Polylactic Acid): Most common and easy to use bioplastic, have a read.
ABS (Acrylonitrile butadiene styrene): Good for parts requiring higher temperature operation, have a read.
PETG (Polyethylene terephthalate): Used when high mechanical strength is required, have a read..


We will use strong cardboard boxes and the appropriate cushioning to protect the printed parts.


We ship from Portugal, Europe and use the reliable Portuguese mail system CTT.
CTT has delivery agreements with different entities on each country so if you´re from the US you may have your order delivered by USPS, in the UK may be Royal Mail and so on.


We charge according to the ctt.pt postage table.


All 3D Printed models and parts are shipped registered. A signature will be required at the delivery address, not necessarily yours but someone at the address.


We will only accept returns of non assembled, undamaged complete models or spare parts.
Postage fees from the original order are non refundable and you will have to pay the postage back to us.
No re-stocking fee if everything arrives in good condition.
In doubt please ask us for an opinion.


Orders can be paid with Paypal or Credit Card via Paypal and are shipped to the address on your Paypal account or to the address you set at checkout.

Spare Parts and Options
All the individual sections of the MESSERSCHMITT BF 109 F can be re-printed on demand.


Fully printed on PLA MESSERSCHMITT BF 109 F model airplane kit.

Price: 49Eur.



Price: 20Eur.

Landing gear version

Allow you to use a landing gear and includes a gauge to bend a piano wire for the landing gear, the resulting piece will fit the landing gear fixings on the wing. You will besnd the wire on a vise, the gauges are just to show you how the bends should be.

Price: 5Eur.

These are the details for the "MESSERSCHMITT BF 109 F" model.

Plan Attributes: Edit Attributes
Plan ID:99261
Keywords:3d print
Model Type:Airplane
Aircraft Use:Fighter
Wingspan: 35 in. / 89 cm
Wingspan Class:75cm-To-100cm (30in-To-40in)
Wing Position:Low-Mounted-Wing
Wing Style:Straight-Wing-Trap
Wing Dihedral:Dihedral
Landing Gear:Taildragger
Motor Type:Electric-Powered
Motor Size:300-To-500-Watt 
Number of Motors:1-Tractor
Weight:820 g
Weight Class:500g-To-1000g (17.6oz-To-35.2oz)
Construction Skills:Low-Intermediate
Pilot Skills:High-Intermediate
Listing Editor:3DLabPrint
Similar:Plans like MESSERSCHMITT BF 109 F

Videos for the MESSERSCHMITT BF 109 F.

All the MESSERSCHMITT BF 109 F Videos

3DLabPrint has uploaded the following MESSERSCHMITT BF 109 F to their Youtube Channel.

Questions or comments about the MESSERSCHMITT BF 109 F? Your comments may help others to build this model...

Related Plans
Plans related to the main plan in this listing page.

ID:99289 | 351.1 KB
38.6 in. / 98 cm Radio-Control Airplane Fighter Electric-Powered 3DLabPrint 3dLabPrint 09/2016
Zivko EDGE Hannes Arch model airplane plan
STEARMAN PT-17 KAYDET model airplane plan
MESSERSCHMITT BF 109T model airplane plan
P51-D MUSTANG model airplane plan
P47 N-15 THUNDERBOLT model airplane plan
Details | Gallery | Article | Prints