Home 3D Printed Model Airplanes 3DLabPrint AICHI M6A SEIRAN


Due to an unanticipated demand on the 3D printed kits there is a waiting queue for production of around 10 days.

If you don´t mind to wait this long your order is welcome.

I will keep you informed about your order status, when it enters production and after its shipped.

AICHI M6A SEIRAN order page.

AICHI M6A SEIRAN ( 42.1 in. / 107 cm ) new69.00 Eur.

We are proud to present the latest in Model Airplanes building technology, 3DLabPrint's creations. We will print on demand a high quality print of the AICHI M6A SEIRAN for you.

AICHI M6A SEIRAN model airplane plan


AICHI M6A SEIRAN High quality 3D Printed Kit
Printed Model Airplanes FAQ


Lenght: 910 mm (35,8 in)
Wingspan: 1070 mm (42.12 in)
Height: 380 mm (14.9 in)
Wing area: 22.8 dm2
Wing loading: 66.6 g/dm2
Center of gravity: 74 mm (28,9 in)
from leading edge

Airfoil: LHK508
Print weight: 918 g
Empty weight (w/o battery): 1220 g
Takeoff weight (3s 3000 lipo): 1520 g
Max takeoff weight: 1800 g
Never exceed speed, VNE: 170 km/h
Design maneuvering speed, VA: 150 km/h
Stall speed, VS: 34 km/h

Propeller: Aeronaut ELP 9x6 or APC 9x6 – 9x7
Motor: Turnigy D3530/14 1100KV or similar
ESC: 30A Electronic Speed Controller
or similar 30-40Amps
Battery: Li-Pol 3000mAh/3s (11.1V), 238g, 25C

Performance measurement:
Max speed VH (level flight): 105 km/h – 56.7kn – 65.2mph with APC 9x6
Rate of climb: 20 m/s (5 373 ft/min) with APC 9x6
Flight time (3s 3000mAh/full): 7:40 with APC 9x6
5:30 with APC 9x7.5
7:40 with aeronaut ELP 9x6

High performance setup:
Motor – AX-4008Q-620KV
Speed controller (ESC) YEP 40A/6S or similar
Battery 1550mAh/6s – or 2x 1550/3s better
(use 2to1 serial connector)

Eco performance setup:
Turnigy D3530/14 1100KV or similar
30A Electronic Speed Controller or similar
Turnigy 3000mAh 3S 20C or similar
propeller two blade 9x6
printed motor mount (size 1, 2, 3 or 4)

Full Specs and Building Manual

Here you can find the complete instructions and specifications to the AICHI M6A SEIRAN.

Download Manual

Important Recommendation

This is almost common sense but, like any other model airplane, these 3D printed models can´t stand too much heat, they may become deformed. Temperatures above 50º centigrades will cause these models to deform and it will be very difficult, if not impossible, to get them back to shape. These planes, if made or painted in dark colors shouldn´t be left in the sun in hot days and shouldn´t be left inside of a car in the sun.

Recommended CA Glue

HK Medium thickness CA

HK Accelerator

This glue and accelerator have been tested and work on PLA, not all glues and accelerators, specially the accelerators work well. If you purchase the AICHI M6A SEIRAN Kit I will include a piece of printed PLA so you can do your tests.

Recommended Power Sets

You can find links to the power sets components in the user manual.

Video Guides

3DLabPrint has uploaded the following AICHI M6A SEIRAN to their Youtube Channel.

Details: Full Details
ID: 99283
Type: Airplane
Class: Round-The-Pole
Use: Fighter
Scale:Scale (1:12)
Motor: Electric-Powered
Motor Size:500-To-750-Watt 
Wingspan: 42.1 in. / 107 cm
Publisher: 3DLabPrint
Designer: 3DLabPrint
Weight:1520 g

About 3D Printed Model Airplanes
If you have doubts about how these models are designed, printed and how the fly, this page is for you.

Before anything else, watch this video.

The most common question I get is:

-How do these planes fly?

The video at the right is from FliteTest's Youtube channel, they installed cameras on the plane and filmed it in flight with a drone, these images are not only spectacular but they also allow us to see the behavior of the plane in flight. Enjoy!

This P-38 in the video requires:

  • 12 channels radio if you don´t use y-cables.
  • 4-5 full days straight to print on one printer if everything goes well.

All our 3D Printed planes are here.

About 3DLabPrint models

These models are designed by Stepen in the Czech Republic, are easy and quick to build and have excellent flight characteristics. The gear is pretty standard, usually 9 or 12 grams servos and two power setups are usually suggested, one composed of high quality motor, ESC and battery and another made from inexpensive HobbyKing stuff but still very capable and with good performance.

When you build from a plan or when you assemble a wood kit, usually you add parts to a developing structure, you may have the fuselage done then you may add a servo tray then you may add a motor mount and so on, on these printed planes everything is built with full integration in mind, all the internal reinforcements, all the linkages, all the ducts for wiring, all the fixtures are one with the structure, in fact, many times you have ducts for the servo wires acting as an internal wing reinforcement.

This is a revolutionary way of thinking or better, a revolutionary way of fabricating model airplanes because many of us had already thought about how good this kind of approach could be but actually doing it has always been the problem.

Even with the advent of high quality/low cost 3D printers this has not became immediately possible, it took a very gifted person, Stepen, to create a design method and correspondent print setting to make these marvelous models possible.

I hope you are not afraid to try the latest in model airplane construction, I´m sure you will be delighted with these amazing model airplanes.

A FAQ page with answers to the most common questions can be found here.

All questions are welcome. Please contact us here.

3D Printed Planes Gallery
These are just a few examples of the amazing internal structures you will find on a 3D printed model airplane.

Order 3D Printed AICHI M6A SEIRAN
Please select the options below to order or add the AICHI M6A SEIRAN to your favorites.

Order the AICHI M6A SEIRAN kit or partsFAQ
Complete Kit:
Complete KIT.
Spare Parts and Options: All the components can be printed on demand.
Printed Manual:
Free but adds 100 grams of weight!
Download Manual
PLA can be painted with acrylic spray.

Ordering a 3D Printed "AICHI M6A SEIRAN"" Kit
This tool allows you to calculate the cost of printing and shipping the AICHI M6A SEIRAN model airplane and/or spare parts.

How to order:
  1. Set the options on the left and click the "Calculate" button
  2. Change the options as needed and click "Calculate" button again.
  3. When you're happy with the results click the Paypal Button and finish the checkout at Paypal´s website.
  4. I will review the order, print and ship.
  5. Printing the AICHI M6A SEIRAN takes approximately 60 hours, for this reason there is a small production queue.
Packaging & Postage:
  1. Larger parts individually bagged then everything in one larger bag so nothing gets lost or damaged.
  2. Cardboard box with bubble wrap cushioning.
  3. Shipped by Airmail with Tracking Code.
  1. The PDF Assembly manual has links to web pages where you can obtain the needed electronics and even some supplies.
  2. On multiple kits orders, each kit will be shipped on an individual box, it wouldn't be cheaper to ship combined.

Terms of Service.
Please read the 3D Printing Service Terms of Use before placing an order.

About the 3D File source:

The AICHI M6A SEIRAN was designed by KapAdFreDD and will be printed by AeroFred.

Model Printing and Order Processing:

Printing a model airplane requires many hours of printing, typically, for the models we sell, between 24 and 72 hours. Since we print on demand your order will be queued. Please contact us to know the current waiting time.


Models from KapAdFreDD can´t be scaled because we don´t have access to the original 3D CAD files to do a proper scaling. When these models are printed all the needed fixtures for motor, battery pack, servos, links, wiring ducts are also printed so they would all be scaled making them impossible to use.


The models from KapAdFreDD are supplied as print files only, we don´t have access to original 3D CAD files so I can´t do modifications. However, PLA glues very well with CA and accelerator so you can do as in any other model airplane kit, you can add balsa or lite ply and you can make any modifications yourself.

You will receive:

  • Complete AICHI M6A SEIRAN 3D Printed KIT on PLA or individual parts for the same model, depending on your order.
  • One piece of printed PLA, some bad print I may have around here, so you can do your experiments and tests instead of trying on the plane itself.
  • Cardboard box with appropriate cushioning so the parts are protected during the shipment.
  • Assembly manual printed copy from KapAdFreDD if requested at the ordering page.

The paper manual is free but not included by default because it adds 100 grams of weight and this may make the postage costs climb considerably. In any case the manual can be downloaded in PDF format in this same page and it will have links to web pages where some of the needed parts an be ordered.

You will NOT receive:

  • Glue.
  • Electronic components
  • Wheels, hinges, propellers, screws, piano wire, paint or decals.

Assembly and preparation:

Modeling work it´s your job :)
You will have to follow the manual to assembly this kit and do all the work needed, this is a model airplane Kit, not a toy.

About our printers:

We use high quality original 3D Printers, no Chinese clone printers or cheap Ebay 3dprinters.

About the different filament types:

PLA (Polylactic Acid): Most common and easy to use bioplastic, have a read.
ABS (Acrylonitrile butadiene styrene): Good for parts requiring higher temperature operation, have a read.
PETG (Polyethylene terephthalate): Used when high mechanical strength is required, have a read..


We will use strong cardboard boxes and the appropriate cushioning to protect the printed parts.


We ship from Portugal, Europe and use the reliable Portuguese mail system CTT.
CTT has delivery agreements with different entities on each country so if you´re from the US you may have your order delivered by USPS, in the UK may be Royal Mail and so on.


We charge according to the ctt.pt postage table.


All 3D Printed models and parts are shipped registered. A signature will be required at the delivery address, not necessarily yours but someone at the address.


We will only accept returns of non assembled, undamaged complete models or spare parts.
Postage fees from the original order are non refundable and you will have to pay the postage back to us.
No re-stocking fee if everything arrives in good condition.
In doubt please ask us for an opinion.


Orders can be paid with Paypal or Credit Card via Paypal and are shipped to the address on your Paypal account or to the address you set at checkout.

Spare Parts and Options
All the individual sections of the AICHI M6A SEIRAN can be re-printed on demand.

Aichi M6A Seiran

3D Printed Aichi M6A Seiran Kit

Price: 69Eur.

These are the details for the "AICHI M6A SEIRAN" model.

Plan Attributes: Edit Attributes
Plan ID:99283
Keywords:3d printed AICHI M6A SEIRAN
Model Type:Airplane
Aircraft Use:Fighter
Wingspan: 42.1 in. / 107 cm
Wingspan Class:100cm-To-125cm (40in-To-50in)
Wing Position:Low-Mounted-Wing
Wing Style:Eliptical
Wing Dihedral:Dihedral
Landing Gear:Floatplane
Motor Type:Electric-Powered
Motor Size:500-To-750-Watt 
Number of Motors:1-Tractor
Weight:1520 g
Construction Skills:Low-Intermediate
Pilot Skills:Low-Intermediate
Listing Editor:KapAdFreDD
Similar:Plans like AICHI M6A SEIRAN

Videos for the AICHI M6A SEIRAN.

All the AICHI M6A SEIRAN Videos

3DLabPrint has uploaded the following AICHI M6A SEIRAN to their Youtube Channel.

Questions or comments about the AICHI M6A SEIRAN? Your comments may help others to build this model...

MESSERSCHMITT BF 109 F model airplane plan
SPITFIRE MK XVI model airplane plan
MESSERSCHMITT BF 109T model airplane plan
Zivko EDGE Hannes Arch model airplane plan
Cessna 152 model airplane plan
Details | Gallery | Article | Prints