Home 3D Printed Model Airplanes 3DLabPrint EasyMax

EasyMax ( 59.8 in. / 152 cm )39.00 Eur.

The EasyMax
We are proud to present the latest in Model Airplanes building technology, 3DLabPrint's creations. We will print on demand a high quality print of the EasyMax for you.

EasyMax model airplane plan

Order the EasyMax Kit

EasyMax High quality 3D Printed Kit
Printed Model Airplanes FAQ

The EasyMax is an easy to fly and easy to assemble "warm liner". You will need 3 servos, one for each half wing and one for the elevator and a 10mm carbon fibre tube, around 46cm long.

If you´re thinking about a low cost 3d model simple to setup and fly you have this one or the QTrainer.

All parts can be printed on demand and replaced on the ready built model.

Lenght: approx 1033mm (40.7in)
Wingspan: 1527mm (60.1in)
Height: 177mm (7.1in)
Wing area: 29.6 dm2
Wing loading: 31.8 g/dm2
Airfoil: E205 modificated
Print weight: 632g
Empty weight(eq. w/o baterry): 820g
Takeoff weight (3s 1500 lipo): 940g
Max takeoff weight: 1300g
Never exceed speed, VNE: 150 km/h
Design maneuvering speed, VA: 90km/h
Stall speed, VS: 20 km/h

Propeller: 11/6 folding propeller
Motor: Turnigy D3530/14 1100KV or similar 3530-35, 2830-36 1100kv
ESC: Aerostar 40A Electronic Speed Controller or similar 40Amps
Battery: Li-Pol Battery 1500mAh/3s – or similar

Available Files

Here you can find the manual for the EasyMax.

Download Manual

Filaments used

We use the so-called High-Temp PLA that is in fact Ingeo 3d850 polymer made in the USA and extruded in Europe and we are in the process of changing all production to the new Ingeo 3d870 polymer that has an impact resistance comparable to ABS. Currently only white prints will be done with the 3d870 filament and as our suppliers start producing filament in other colors we will replace one for the other.

Both are excellent products just the Ingeo 3d870 is better.

PET-G parts are printed with Devil Design PET-G or some other good quality I have here. I don´t know who is exactly the manufacturer of the polymer, its not always easy to know that.

Recommended CA Glue

HK Medium thickness CA

HK Accelerator

This glue and accelerator have been tested and work on PLA, not all glues and accelerators, specially the accelerators work well. If you purchase the EasyMax Kit I will include a piece of printed PLA so you can do your tests.

Recommended Power Sets

You can find links to the power sets components in the user manual.
Download Manual

Hot weather

In the Summer it's advisable to not let a printed plane inside the car under the sun, it will become deformed like any other plane made of plastic. At the flying field, planes made or painted with dark colors can become hot and can become deformed, leave your printed plane in the shade.

Building Log

3DLabPrint has created the following EasyMax building log.
EasyMax Building Log

More Videos

3DLabPrint has uploaded the following EasyMax to their Youtube Channel.
EasyMax Videos

Details: Full Details
ID: 99502
Type: Glider
Class: Radio-Control
Use: Sport
Motor: Electric-Powered
Wingspan: 59.8 in. / 152 cm
Publisher: 3DLabPrint
Designer: 3dlabprint
Weight:1300 g

About 3D Printed Model Airplanes
If you have doubts about how these models are designed, printed and how the fly, this page is for you.

Before anything else, watch this video.

The most common question I get is:

-How do these planes fly?

The video at the right is from FliteTest's Youtube channel, they installed cameras on the plane and filmed it in flight with a drone, these images are not only spectacular but they also allow us to see the behavior of the plane in flight. Enjoy!

This P-38 in the video requires:

  • 12 channels radio if you don´t use y-cables.
  • 4-5 full days straight to print on one printer if everything goes well.

All our 3D Printed planes are here.

About 3DLabPrint models

These models are designed by Stepen in the Czech Republic, are easy and quick to build and have excellent flight characteristics. The gear is pretty standard, usually 9 or 12 grams servos and two power setups are usually suggested, one composed of high quality motor, ESC and battery and another made from inexpensive HobbyKing stuff but still very capable and with good performance.

When you build from a plan or when you assemble a wood kit, usually you add parts to a developing structure, you may have the fuselage done then you may add a servo tray then you may add a motor mount and so on, on these printed planes everything is built with full integration in mind, all the internal reinforcements, all the linkages, all the ducts for wiring, all the fixtures are one with the structure, in fact, many times you have ducts for the servo wires acting as an internal wing reinforcement.

This is a revolutionary way of thinking or better, a revolutionary way of fabricating model airplanes because many of us had already thought about how good this kind of approach could be but actually doing it has always been the problem.

Even with the advent of high quality/low cost 3D printers this has not became immediately possible, it took a very gifted person, Stepen, to create a design method and correspondent print setting to make these marvelous models possible.

I hope you are not afraid to try the latest in model airplane construction, I´m sure you will be delighted with these amazing model airplanes.

A FAQ page with answers to the most common questions can be found here.

All questions are welcome. Please contact us here.

3D Printed Planes Gallery
These are just a few examples of the amazing internal structures you will find on a 3D printed model airplane.

Order 3D Printed EasyMax
Please select the options below.

Order the EasyMax kit or partsFAQ
Complete Kit:
Complete KIT.
Spare Parts and Options:
All the components can be printed on demand.
Printed Manual:
Free but adds 100 grams of weight!
Download Manual

** Other colors may delay the delivery and production of your kit for 2-3 days. After purchase I will contact you to define how the colors will be used.
PLA can be painted with acrylic spray.
The production lead time for new orders is currently 2 days or less.

Ordering a 3D Printed "EasyMax"" Kit
This tool allows you to calculate the cost of printing and shipping the EasyMax model airplane kit and/or spare parts.

How to order:
  1. Set the options on the left and click the "Calculate" button
  2. Change the options as needed and click "Calculate" button again.
  3. When you're happy with the results click the Paypal Button and finish the checkout at Paypal´s website.
  4. I will review the order, print and ship.
  5. Printing the EasyMax takes approximately   hours on one single printer, thankfully we have 6 printers at the moment so your kit will be produced in just a few hours and will be ready to ship in less than 2 days.
Packaging & Postage:
  1. Larger parts individually bagged then everything in one larger bag so nothing gets lost or damaged.
  2. Single or double cardboard box with bubble wrap cushioning.
  3. Shipped by Registered Airmail with Tracking Code.
  1. The PDF Assembly manual has links to web pages where you can obtain the needed electronics and even some supplies.
  2. On multiple kits orders, each kit will be shipped on an individual box, it wouldn't be cheaper to ship combined.

Terms of Service.
Please read the 3D Printing Service Terms of Use before placing an order.

About the 3D File source:

The EasyMax was designed by 3DLabPrint and will be printed by AeroFred as a service.

Model Printing and Order Processing:

Printing a model airplane requires many hours of printing, typically, for the models we sell, between 24 and 72 hours if the job is done one one single printer. Luckily we have many printers so your new plane will be ready to ship in 1-2 days or even less if it´s a small model.


Models from 3DLabPrint can´t be scaled because we don´t have access to the original 3D CAD files to do a proper scaling. When these models are printed all the needed fixtures for motor, battery pack, servos, links, wiring ducts are also printed so they would all be scaled making them impossible to use.


The models from 3DLabPrint are supplied as print files only, we don´t have access to original 3D CAD files so I can´t do modifications. However, PLA glues very well with CA and accelerator so you can do as in any other model airplane kit, you can add balsa or lite ply and you can make any modifications yourself.

You will receive:

  • Complete EasyMax 3D Printed KIT on PLA or individual parts for the same model, depending on your order.
  • One piece of printed PLA, some bad print I may have around here, so you can do your experiments and tests instead of trying on the plane itself.
  • Cardboard box with appropriate cushioning so the parts are protected during the shipment.
  • Assembly manual printed copy from 3DLabPrint if requested at the ordering page.

The paper manual is free but not included by default because it adds weight that may make the postage costs climb considerably. I reserve the right to add the paper manual or not.
In any case the manual can be downloaded in PDF format in this same page and it will have links to web pages where some of the needed parts an be ordered.

You will NOT receive:

  • 3d .stl or .gcode files, project files or any files at all apart from the pdf manual.
  • CA Glue or CA Accelerator.
  • Electronic components.
  • Wheels, hinges, propellers, screws, piano wire, paint or decals.

Vinyl decals do not stick on 3d printed planes, the only way to add insignia, camouflage, letterings is to paint with acrylic spray paint and a stencil or a mask.

Assembly and preparation:

Modeling work it´s your job :)
You will have to follow the manual to assembly this kit and do all the work needed, this is a model airplane Kit, not a toy.

About our printers:

We use high quality original 3D Printers, no Chinese clone printers or cheap Ebay 3d printers.

About the different filament types:

PLA (Polylactic Acid): Most common and easy to use bioplastic, have a read.
ABS (Acrylonitrile butadiene styrene): Good for parts requiring higher temperature operation, have a read.
PETG (Polyethylene terephthalate): Used when high mechanical strength is required, have a read..


We will use strong cardboard boxes and the appropriate cushioning to protect the printed parts.


We ship from Portugal, Europe and use the reliable Portuguese mail system CTT.
CTT has delivery agreements with different entities on each country so if you´re from the US you may have your order delivered by USPS, in the UK may be Royal Mail and so on.


We charge according to the ctt.pt postage table.


All 3D Printed models and parts are shipped registered. A signature will be required at the delivery address, not necessarily yours but someone at the address.


We will only accept returns of non assembled, undamaged complete models or spare parts.
Postage fees from the original order are non refundable and you will have to pay the postage back to us.
No re-stocking fee if everything arrives in good condition.
In doubt please ask us for an opinion.


Orders can be paid with Paypal or Credit Card via Paypal and are shipped to the address on your Paypal account or to the address you set at checkout.

Spare Parts and Options
All the individual sections of the EasyMax can be re-printed on demand.

EasyMax (3d Printed Kit)

Fully Printed EasyMax Kit

Price: 39Eur.

Wing Section

1 wing panel for this model

Price: 3Eur.

Fuselage Section

1 fuselage section for this model

Price: 3Eur.

Tail Parts

Horizontal, vertical stabilisers and control surfaces

Price: 2Eur.

These are the details for the "EasyMax" model.

Plan Attributes: Edit Attributes
Plan ID:99502
Model Type:Glider
Aircraft Use:Sport
Wingspan: 59.8 in. / 152 cm
Wing Position:High-Mounted-Wing
Wing Style:Eliptical
Wing Dihedral:Dihedral
Landing Gear:Skid
Motor Type:Electric-Powered
Number of Motors:1-Tractor
Weight:1300 g
Weight Class:1000g-To-1500g (35.2oz-To-52.9oz)
Construction Skills:Low-Intermediate
Pilot Skills:Low-Intermediate
Listing Editor:3DLabPrint
Similar:Plans like EasyMax

Videos for the EasyMax.

Building Log

3DLabPrint has created the following EasyMax building log.
EasyMax Building Log

All the EasyMax Videos

3DLabPrint has uploaded the following EasyMax to their Youtube Channel.
Go to EasyMax Videos

Thinking about building the EasyMax? Prev Next Plan
If you know about a building log for this plane please post a comment, we will add it to the listing here.

Video Guide

3DLabPrint has created the following EasyMax video guide:
EasyMax Video Guide

Questions or comments about the EasyMax? Your comments may help others to build this model...

Zivko EDGE Hannes Arch model airplane plan
Cessna 152 model airplane plan
P-38 LIGHTNING model airplane plan
SPITFIRE MK XVI model airplane plan
MESSERSCHMITT BF 109 F or H model airplane plan
Details | Gallery |