Home 3D Printed Model Airplanes 3DLabPrint Spitfire MK IX

Spitfire MK IX ( 66.9 in. / 170 cm ) new175.00 Eur.


The Spitfire MK IX
We are proud to present the latest in Model Airplanes building technology, 3DLabPrint's creations. We will print on demand a high quality print of the Spitfire MK IX for you.

Spitfire MK IX model airplane plan

Spitfire MK IX
Order the Spitfire MK IX Kit

Spitfire MK IX High quality 3D Printed Kit
Printed Model Airplanes FAQ


3D Printed 1.7 meter/67in span Spitfire MK IX

This Spitfire MK IX is a work of art and an engineering marvel... And it flies so well.

I thought that after seeing the Mig-15 I had seen it all but no, this Spitfire is beyond imagination, so many details, so many new and intelligent solutions like the new sliding canopy or the new motor mount and firewall system, just to mention a few.

This model is supplied with two front sections so you can use a longer or a shorter motor and has no logos in the outside so you can make a perfect scale looking model.

I will also include spinners for 2, 3 and 4 bladed propellers round tip and clipped wing tips and a few other minor extras like a pet-g rear landing gear structure.

A retractable landing gear set will be needed, there are two options, please check the links in the downloadable manual.

The number of files to print is 45! Many are large files taking more then 12 hours to print so the usual 2-3 days production time may be delayed if I have to repeat one file or two.

This is a stunning plane, the most advanced 3d printed airplane today, far beyond any foamies and ARF toy plane out there.

This is aero modelling at its finest, 21st century aero modelling at its best.


------------------------

Length: 1488 mm / 58,6 inch
Wingspan: 1700mm / 66.9 inch
Height: 510 mm / 20.1 inch
Wing area: 51.4 dm2 / 5.53 sq ft
Wing loading: 71.9 g/dm2 / 23.6 oz at sq ft

Center of gravity: 102mm / 4.01 in from LE
See CG tags on wings...
Airfoil: 3DLabPrint SPT02
Weight of all printed parts: 2060 g / 72.7 oz
Takeoff weight (6s 4500mAh Li-Pol): 3700 g / 130.5 oz
Max takeoff weight: 4200 g / 148.2 oz

Never exceed speed, VNE: 160 km/h / 99.4 mph
Design maneuvering speed, VA: 120 km/h / 74.6 mph
Stall speed, VS(full flaps): 38 km/h / 23.6 mph


Some tested setups:

SETUP A)
Motor: AXI 4120/20 GOLD LINE V2 465KV
ESC: MEZON 120 lite or similar at leats 70A/6s
Battery: ZIPPY Compact 4500mAh 6S 35C or similar 6s weight approx 700g
Propeller: Turnigy Type A Beech Wood 3-Blade Propeller 15x8
alternatively Turnigy Beech Wood Propeller 15x8

SETUP B)
Motor: Turnigy Aerodrive SK3 - 5055-430KV or similar with same KV and weight
ESC: HobbyKing 70A BlueSeries or similar at leats 70A/6s
Battery: ZIPPY Compact 4500mAh 6S 35C or similar 6s weight approx 700g
Propeller: Turnigy Type A Beech Wood 3-Blade Propeller 15x8
alternatively Turnigy Beech Wood Propeller 15x8

SETUP C)
Motor: LEOPARD LC5065-7T 380KV or similar with same KV and weight
ESC: HobbyKing 70A BlueSeries or similar at leats 70A/6s
Battery: ZIPPY Compact 4500mAh 6S 35C or similar 6s weight approx 700g
Propeller: APC 15.5x12-4 Blade Propeller


Available Files

Here you can find the manual for the Spitfire MK IX.

Download Manual


Filaments used

We use the so-called High-Temp PLA that is in fact Ingeo 3d850 polymer made in the USA and extruded in Europe and we are in the process of changing all production to the new Ingeo 3d870 polymer that has an impact resistance comparable to ABS. Currently only white prints will be done with the 3d870 filament and as our suppliers start producing filament in other colors we will replace one for the other.

Both are excellent products just the Ingeo 3d870 is better.

PET-G parts are printed with Devil Design PET-G or some other good quality I have here. I don´t know who is exactly the manufacturer of the polymer, its not always easy to know that.


Recommended CA Glue

Glue:
HK Medium thickness CA

Accelerator:
HK Accelerator

Note:
This glue and accelerator have been tested and work on PLA, not all glues and accelerators, specially the accelerators work well. If you purchase the Spitfire MK IX Kit I will include a piece of printed PLA so you can do your tests.


Recommended Power Sets

You can find links to the power sets components in the user manual.
Download Manual


Hot weather

In the Summer it's advisable to not let a printed plane inside the car under the sun, it will become deformed like any other plane made of plastic. At the flying field, planes made or painted with dark colors can become hot and can become deformed, leave your printed plane in the shade.


Building Log

3DLabPrint has created the following Spitfire MK IX building log.
Spitfire MK IX Building Log


More Videos

3DLabPrint has uploaded the following Spitfire MK IX to their Youtube Channel.
Spitfire MK IX Videos

Details: Full Details
ID: 99535
Type: Airplane
Class: Radio-Control
Use: Fighter
Motor: Electric-Powered
Wingspan: 66.9 in. / 170 cm
Publisher: 3DLabPrint
Designer: 3DLabPrint
Material:Plastic-ABS

About 3D Printed Model Airplanes
If you have doubts about how these models are designed, printed and how the fly, this page is for you.

Before anything else, watch this video.

The most common question I get is:

-How do these planes fly?

The video at the right is from FliteTest's Youtube channel, they installed cameras on the plane and filmed it in flight with a drone, these images are not only spectacular but they also allow us to see the behavior of the plane in flight. Enjoy!

This P-38 in the video requires:

  • 12 channels radio if you don´t use y-cables.
  • 4-5 full days straight to print on one printer if everything goes well.

All our 3D Printed planes are here.


About 3DLabPrint models

These models are designed by Stepen in the Czech Republic, are easy and quick to build and have excellent flight characteristics. The gear is pretty standard, usually 9 or 12 grams servos and two power setups are usually suggested, one composed of high quality motor, ESC and battery and another made from inexpensive HobbyKing stuff but still very capable and with good performance.

When you build from a plan or when you assemble a wood kit, usually you add parts to a developing structure, you may have the fuselage done then you may add a servo tray then you may add a motor mount and so on, on these printed planes everything is built with full integration in mind, all the internal reinforcements, all the linkages, all the ducts for wiring, all the fixtures are one with the structure, in fact, many times you have ducts for the servo wires acting as an internal wing reinforcement.

This is a revolutionary way of thinking or better, a revolutionary way of fabricating model airplanes because many of us had already thought about how good this kind of approach could be but actually doing it has always been the problem.

Even with the advent of high quality/low cost 3D printers this has not became immediately possible, it took a very gifted person, Stepen, to create a design method and correspondent print setting to make these marvelous models possible.

I hope you are not afraid to try the latest in model airplane construction, I´m sure you will be delighted with these amazing model airplanes.

A FAQ page with answers to the most common questions can be found here.

All questions are welcome. Please contact us here.


3D Printed Planes Gallery
These are just a few examples of the amazing internal structures you will find on a 3D printed model airplane.

Order 3D Printed Spitfire MK IX
Please select the options below.

Order the Spitfire MK IX kit or partsFAQ
Region:
Complete Kit:
Complete KIT.
Spare Parts and Options:
All the components can be printed on demand.
Printed Manual:
Free but adds 100 grams of weight!
Download Manual
Color:




** Other colors may delay the delivery and production of your kit for 2-3 days. After purchase I will contact you to define how the colors will be used.
PLA can be painted with acrylic spray.
The production lead time for new orders is currently 2 days or less.

Ordering a 3D Printed "Spitfire MK IX"" Kit
This tool allows you to calculate the cost of printing and shipping the Spitfire MK IX model airplane kit and/or spare parts.

How to order:
  1. Set the options on the left and click the "Calculate" button
  2. Change the options as needed and click "Calculate" button again.
  3. When you're happy with the results click the Paypal Button and finish the checkout at Paypal´s website.
  4. I will review the order, print and ship.
  5. Printing the Spitfire MK IX takes approximately 260 hours on one single printer, thankfully we have more than one printer so your kit will be produced just in 8 to 36 hours, depending on the complexity of the print.
Packaging & Postage:
  1. Larger parts individually bagged then everything in one larger bag so nothing gets lost or damaged.
  2. Single or double cardboard box with bubble wrap cushioning.
  3. Shipped by Registered Airmail with Tracking Code.
Note:
  1. The PDF Assembly manual has links to web pages where you can obtain the needed electronics and even some supplies.
  2. On multiple kits orders, each kit will be shipped on an individual box, it wouldn't be cheaper to ship combined.

Terms of Service.
Please read the 3D Printing Service Terms of Use before placing an order.

About the 3D File source:

The Spitfire MK IX was designed by 3DLabPrint and will be printed by AeroFred as a service.

Model Printing and Order Processing:

Printing a model airplane requires many hours of printing, typically, for the models we sell, between 24 and 72 hours if the job is done one one single printer. Luckily we have many printers so your new plane will be ready to ship in 1-2 days or even less if it´s a small model.

Scaling:

Models from 3DLabPrint can´t be scaled because we don´t have access to the original 3D CAD files to do a proper scaling. When these models are printed all the needed fixtures for motor, battery pack, servos, links, wiring ducts are also printed so they would all be scaled making them impossible to use.

Modifications:

The models from 3DLabPrint are supplied as print files only, we don´t have access to original 3D CAD files so I can´t do modifications. However, PLA glues very well with CA and accelerator so you can do as in any other model airplane kit, you can add balsa or lite ply and you can make any modifications yourself.

You will receive:

  • Complete Spitfire MK IX 3D Printed KIT on PLA or individual parts for the same model, depending on your order.
  • One piece of printed PLA, some bad print I may have around here, so you can do your experiments and tests instead of trying on the plane itself.
  • Cardboard box with appropriate cushioning so the parts are protected during the shipment.
  • Assembly manual printed copy from 3DLabPrint if requested at the ordering page.

The paper manual is free but not included by default because it adds weight that may make the postage costs climb considerably. I reserve the right to add the paper manual or not.
In any case the manual can be downloaded in PDF format in this same page and it will have links to web pages where some of the needed parts an be ordered.


You will NOT receive:

  • 3d .stl or .gcode files, project files or any files at all apart from the pdf manual.
  • CA Glue or CA Accelerator.
  • Electronic components.
  • Wheels, hinges, propellers, screws, piano wire, paint or decals.

Note:
Vinyl decals do not stick on 3d printed planes, the only way to add insignia, camouflage, letterings is to paint with acrylic spray paint and a stencil or a mask.


Assembly and preparation:

Modeling work it´s your job :)
You will have to follow the manual to assembly this kit and do all the work needed, this is a model airplane Kit, not a toy.

About our printers:

We use high quality original 3D Printers, no Chinese clone printers or cheap Ebay 3d printers.

About the different filament types:

PLA (Polylactic Acid): Most common and easy to use bioplastic, have a read.
ABS (Acrylonitrile butadiene styrene): Good for parts requiring higher temperature operation, have a read.
PETG (Polyethylene terephthalate): Used when high mechanical strength is required, have a read..

Packaging:

We will use strong cardboard boxes and the appropriate cushioning to protect the printed parts.

Shipping:

We ship from Portugal, Europe and use the reliable Portuguese mail system CTT.
CTT has delivery agreements with different entities on each country so if you´re from the US you may have your order delivered by USPS, in the UK may be Royal Mail and so on.


Postage:

We charge according to the ctt.pt postage table.

Tracking:

All 3D Printed models and parts are shipped registered. A signature will be required at the delivery address, not necessarily yours but someone at the address.

Returns:

We will only accept returns of non assembled, undamaged complete models or spare parts.
Postage fees from the original order are non refundable and you will have to pay the postage back to us.
No re-stocking fee if everything arrives in good condition.
In doubt please ask us for an opinion.

Payments:

Orders can be paid with Paypal or Credit Card via Paypal and are shipped to the address on your Paypal account or to the address you set at checkout.

Spare Parts and Options
All the individual sections of the Spitfire MK IX can be re-printed on demand.

Spitfire MK IX (3d Printed Kit)

Fully Printed Spitfire MK IX Kit

Price: 175Eur.

Wing Section

1 wing panel for this model

Price: 6Eur.

Fuselage Section

1 fuselage section for this model

Price: 6Eur.

Tail Parts

Horizontal, vertical stabilisers and control surfaces

Price: 3Eur.

Details
These are the details for the "Spitfire MK IX" model.

Plan Attributes: Edit Attributes
Plan ID:99535
Keywords:3d printed spitfire mk ix
Class:Radio-Control
Model Type:Airplane
Channels:6-ch
Functions:Ailerons-Flaps-Elevator-Rudder-Throttle-Landing-Guear
Aircraft Use:Fighter
Wingspan: 66.9 in. / 170 cm
Wingspan Class:160cm-To-200cm (63in-To-79in)
Wing Position:Low-Mounted-Wing
Wing Style:Eliptical
Wing Dihedral:Dihedral
Landing Gear:Taildragger
Motor Type:Electric-Powered
Number of Motors:1-Tractor
Material:Plastic-ABS
Construction Skills:High-Intermediate
Pilot Skills:High-Intermediate
Publisher:3DLabPrint
Date:08/2017
Designer:3DLabPrint
Found:
3DLabPrint.com
Listing Editor:3DLabPrint
Category:3DLabPrint
Similar:Plans like Spitfire MK IX

Video
Videos for the Spitfire MK IX.


Building Log

3DLabPrint has created the following Spitfire MK IX building log.
Spitfire MK IX Building Log


All the Spitfire MK IX Videos

3DLabPrint has uploaded the following Spitfire MK IX to their Youtube Channel.
Go to Spitfire MK IX Videos

Thinking about building the Spitfire MK IX? Next Plan
If you know about a building log for this plane please post a comment, we will add it to the listing here.


Video Guide

3DLabPrint has created the following Spitfire MK IX video guide:
Spitfire MK IX Video Guide

Comments
Questions or comments about the Spitfire MK IX? Your comments may help others to build this model...


Related Plans
Plans related to the main plan in this listing page.

NameSpanClassTypeUsePowerPublisherDesignerDate
Spitfire II
ID:98779 | 1.7 MB
442 in. / 1122.7 cm Real-Vehicle Airplane Fighter --- --- --- ---
Spitfire IX
ID:91052 | 4.7 MB
64.25 in. / 163.2 cm Radio-Control Airplane Fighter Glow-Powered --- George Harris ---
Spitfire MK.V
ID:93124 | 773.6 KB
70 in. / 177.8 cm Radio-Control Airplane Fighter Glow-Powered RCM&E Tony Nijhuis 01/2010
Spitfire MK IX
ID:93126 | 632.9 KB
63 in. / 160 cm Radio-Control Airplane Fighter Glow-Powered RCM&E Tony Nijhuis 06/2007
Spitfire XIV
ID:94658 | 1.2 MB
38.6 in. / 98 cm Radio-Control Airplane Fighter Glow-Powered Progressive Miniature Aviation Progressive Miniature Aviation 10/1993
Spitfire MKI
ID:98441 | 1.3 MB
74.8 in. / 190 cm Radio-Control Airplane Fighter Glow-Powered --- Jerry White ---
Spitfire IX
ID:91037 | 1.5 MB
18 in. / 45.7 cm Free-Flight Airplane Fighter Rubber-Band-Powered --- Earl Stahl ---
Spitfire III
ID:91050 | 1.2 MB
16 in. / 40.6 cm Free-Flight Airplane Fighter Rubber-Band-Powered Whitman Publishing Co. --- 1941
Spitfire Mk I
ID:91056 | 3.6 MB
18 in. / 45.7 cm Free-Flight Airplane Fighter Rubber-Band-Powered J.D. McHard J.D. McHard ---
Spitfire Mk II
ID:91072 | 1.1 MB
18 in. / 45.7 cm Free-Flight Airplane Fighter Rubber-Band-Powered Keil Kraft Albert E. Hatfull ---
SPITFIRE MK XVI model airplane plan
 342
Radio-Control
Airplane
Electric-Powered
Fighter
Cessna 152 model airplane plan
 380
Radio-Control
Airplane
Electric-Powered
Civilian
AICHI M6A SEIRAN model airplane plan
 262
Radio-Control
Airplane
Electric-Powered
Fighter
QTrainer model airplane plan
 561
Radio-Control
Airplane
Electric-Powered
Trainer
Zivko EDGE Hannes Arch model airplane plan
 643
Radio-Control
Airplane
Electric-Powered
Acro
Details | Gallery | Supplemental |